Accoustat Help

Gary Hubbard · 14th February 2010, 06:57 PM

Looking for any suggestions on dismantling one of my Spectra 2200s which appears to have a wiring short from the interface to the panel. It looks like it because there is a black "smuge" on the back of the tan sock at the bottom. That may be what blew the rail fuse on one channel of my B&K power amp. I appreciate anyone's help. Gary Hubbard.

Atom666 · 15th February 2010, 06:53 PM

Try posting on the Acoustat portion of the Audiocircuit website. Andy Szabo used to work at Acoustat and he regularly answers questions specific to Acoustat .
Acoustat

Hope this helps
Andrew

david yost · 15th February 2010, 10:17 PM

Can you take a picture of the "smuge"? Asking, because the tan material does tend to acquire dark spots with age -- at least my Acoustats did.

I would be surprised if you have any problems with the panels or wiring to the interfaces, though. IIRC, the wire Acoustat used was rated for something like 10KV, so unless the insulation has chafed or been cut, it should be fine. Do you get any output at all from the "bad" speaker?

14th February 2010, 06:57 PM	#1
Gary Hubbard diyAudio Member Join Date: Dec 2008 Location: Rockford, IL	Accoustat Help Looking for any suggestions on dismantling one of my Spectra 2200s which appears to have a wiring short from the interface to the panel. It looks like it because there is a black "smuge" on the back of the tan sock at the bottom. That may be what blew the rail fuse on one channel of my B&K power amp. I appreciate anyone's help. Gary Hubbard.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
electrostatic accoustat panels	boxcustom	Swap Meet	0	13th July 2009 03:37 AM
accoustat and direct drive. big text, small question about igbt	etalon90	Planars & Exotics	14	27th July 2006 06:30 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

15th February 2010, 06:53 PM	#2
Atom666 diyAudio Member Join Date: Oct 2005 Location: Toronto, Canada	Try posting on the Acoustat portion of the Audiocircuit website. Andy Szabo used to work at Acoustat and he regularly answers questions specific to Acoustat . Acoustat Hope this helps Andrew

15th February 2010, 10:17 PM	#3
david yost diyAudio Member Join Date: Feb 2005 Location: atlanta	Can you take a picture of the "smuge"? Asking, because the tan material does tend to acquire dark spots with age -- at least my Acoustats did. I would be surprised if you have any problems with the panels or wiring to the interfaces, though. IIRC, the wire Acoustat used was rated for something like 10KV, so unless the insulation has chafed or been cut, it should be fine. Do you get any output at all from the "bad" speaker?

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)