diyAudio (
-   Planars & Exotics (
-   -   My MBL 101E replicas (

areczek 14th October 2009 07:43 AM

My MBL 101E replicas
I present uncomplete documentation from work over my structure of replication of array MBL 101E.

Idea of building has emerged in year 2006.Work were base about fabrication for loudspeaker earlier tone frequent highly.With middling tonne loudspeaker just the same work.Idea has emerged in order to whole array collate Radialstrahler.

areczek 14th October 2009 10:16 AM

2 Attachment(s)

SY 14th October 2009 10:28 AM

This is interesting, the MBL is an extraordinary speaker. I'm very curious to see what you did for drivers.

areczek 14th October 2009 04:17 PM

2 Attachment(s)
Magnets for omni speakers and 12 bass inch.
Magnets have internal-8,8inch/4,4inch/1inch.
Diameter voice coil 4inch.
Weight one magnetic match 24 -pounds.

areczek 14th October 2009 06:51 PM

2 Attachment(s)
I have designed magnets for project of replication specially radialstrahler.
Induction in slot 1,2T.

areczek 15th October 2009 07:18 PM

1 Attachment(s)
Reels prepared specially for project replica radialstrahler.

areczek 17th October 2009 08:59 PM

3 Attachment(s)
Induction in slot of magnet for loudspeakers highly tone-1, 6T.
Trial loudspeakers. Petals built with from carbon fiber.

areczek 17th October 2009 09:04 PM

1 Attachment(s)
Joint, middling tone and highly tone.

NV&H 18th October 2009 12:21 AM

You are amazing!

areczek 18th October 2009 07:46 AM


I thank very.

All times are GMT. The time now is 04:10 AM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 18.75%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Copyright ©1999-2018 diyAudio