Spraying conductive coating

405man · 3rd April 2008, 06:25 PM

Has anyone any experience of spraying conductive coating, I was looking at one of these devices http://www.prevalspraygun.com/
I am rebuilding some ESL63 panels.

Stuart

Calvin · 4th April 2008, 08:40 AM

Hi,

its nearly impossible to get even coatings with a spray can nozzle.
Airbrush pistols are alternatives. Maybe you can get an airbrush shop to do the job for You?

jauu
Calvin

MJ Dijkstra · 4th April 2008, 08:53 AM

Hi,

Wether an airbrush is possible or not depends on the specific type (properties) of the coatingfluid.
Your supplier of coating fluid should be able to give you the right answer. Spraying coatings which are not designed to be sprayed may result in failure!!

bentoronto · 4th April 2008, 10:33 PM

Omeegosh, I am so out of date. I thought the only ways were spreading Halo shampoo or rubbing graphite on with balls of cotton wool.

Can somebody very briefly name a few of today's leading methods for me?

Thanks.

GlidingDutchman · 6th April 2008, 11:39 AM

How about using a misting system to apply the coating by means of a very fine mist? Almost like "dusting"...

Dewald

3rd April 2008, 06:25 PM	#1
405man diyAudio Member Join Date: Dec 2003 Location: South Lanarkshire near Glasgow Scotland	Spraying conductive coating Has anyone any experience of spraying conductive coating, I was looking at one of these devices http://www.prevalspraygun.com/ I am rebuilding some ESL63 panels. Stuart

4th April 2008, 08:53 AM	#3
MJ Dijkstra diyAudio Member Join Date: Apr 2005 Location: Utrecht	Hi, Wether an airbrush is possible or not depends on the specific type (properties) of the coatingfluid. Your supplier of coating fluid should be able to give you the right answer. Spraying coatings which are not designed to be sprayed may result in failure!! __________________ drs M.J. Dijkstra

4th April 2008, 10:33 PM	#4
bentoronto diyAudio Member Join Date: Jan 2008 Location: Toronto and Delray Beach, FL	Omeegosh, I am so out of date. I thought the only ways were spreading Halo shampoo or rubbing graphite on with balls of cotton wool. Can somebody very briefly name a few of today's leading methods for me? Thanks. __________________ Dennesen ESL tweets, Dayton-Wright ESL (110-3200Hz), mixed-bass Klipschorn w/param EQ plus giant OB using 1960's Stephens woofer HiFi aspirations since 1956

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Conductive coatings	danielm	Planars & Exotics	48	24th April 2010 01:45 PM
Nylon conductive coating	drewb	Planars & Exotics	12	19th April 2008 10:24 AM
Re-post: Spraying advice needed Sorry	tf1216	Multi-Way	18	28th April 2006 03:41 PM
Spraying advice needed	tf1216	Everything Else	2	25th April 2006 05:15 PM
spraying the guts of my amp...	9am53	Tubes / Valves	2	20th April 2005 01:25 AM


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

4th April 2008, 08:40 AM	#2
Calvin diyAudio Member Join Date: Nov 2004 Location: close to Basel	Hi, its nearly impossible to get even coatings with a spray can nozzle. Airbrush pistols are alternatives. Maybe you can get an airbrush shop to do the job for You? jauu Calvin

6th April 2008, 11:39 AM	#5
GlidingDutchman diyAudio Member Join Date: Nov 2007	How about using a misting system to apply the coating by means of a very fine mist? Almost like "dusting"... Dewald

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read