Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Planars & Exotics ESL's, planars, and alternative technologies

neoprene spacers
neoprene spacers
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 9th January 2007, 07:01 PM   #1
gvy is offline gvy  Belgium
diyAudio Member
Join Date: Dec 2006
Default neoprene spacers

Hi everybody,

I am currently building 4 esl with wire stators.

The frame is made of standard furniture panel with melamine toplayer
I measured it out with a megger on 2500V and it is totally non conductive (resistance almost 1 Terraohm)
On that frame I glued the statorwires, which are isolated copperwires.

Now on that frame I glued the spacers. Those are 2mm neoprene strips fixed on the frame with double sided extra strong tape.
Now her is (maybe) a problem.
I got suspicious because I read here that neoprene seems to be not at all that good isolator I thought it was.
So I measured and yes , when I put both probes of the megger (2500V) on the neopren surface I get 300Mohms.

This is less then the surface resistance of the coated membrane.

Not good I think.

BUT, on the other hand.....
Is there really a problem????

Because the spacers are fixed on a totally non conductive frame and
The statorwires are isolated wires also fixed on that non conductive frame. Is there really a problem?????

If I measure the resistance between the copper of the statorwires and the neoprene spacer again with a megger on 2500V I get a resistance around 40Gigaohm

So I think the neoprene spacers do not a good job as isolator, but It doesnt really matter in my kind of construction.
I like them as spacer because the rubber has a dampenning effect on the membrane and they are easy to work with.

I have a set of esls for about 4 years with the same construction and they play well. It's just..... because I maesured it , I started to doubt....

  Reply With Quote


neoprene spacersHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
dots or strips for spacers? CharlieM Planars & Exotics 42 21st January 2017 12:59 PM
Spacers for sale jmateus Swap Meet 0 29th August 2005 01:00 PM
Chromed cast iron rack spacers(??) FS InDaGroove Everything Else 0 14th June 2005 01:50 AM
Spacers for electrostatics jmateus Swap Meet 1 29th October 2004 01:26 PM

New To Site? Need Help?

All times are GMT. The time now is 11:24 AM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 16.67%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Copyright ©1999-2018 diyAudio