Finished 'product'
An externally hosted image should be here but it was not working when we last tested it.
An externally hosted image should be here but it was not working when we last tested it.
An externally hosted image should be here but it was not working when we last tested it.
... turned out to be a bad idea. Too much bathing the brass parts in vinegar resulted in 'dezincification'. Fortunately, I managed to source an another bulgin socket.
I used citric acid instead of vinegar this time.
An externally hosted image should be here but it was not working when we last tested it.
An externally hosted image should be here but it was not working when we last tested it.
The bare transformer ready to be cleaned
An externally hosted image should be here but it was not working when we last tested it.
After some 'manual labour' of sanding the components:
An externally hosted image should be here but it was not working when we last tested it.
An externally hosted image should be here but it was not working when we last tested it.
I obtained two of these phenolic boxes from One Thing Audio for cheap. I will put this in instead of that was on it.
The EHT box I will swap:
The EHT box I will swap:
An externally hosted image should be here but it was not working when we last tested it.
Last edited:
...to this one
An externally hosted image should be here but it was not working when we last tested it.
...but first, I swap the old diodes to new ones.
Melting the wax with a hair-drier
Melting the wax with a hair-drier
An externally hosted image should be here but it was not working when we last tested it.
