Recoating Martin Logan Aerius Panel

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
I have put lots of thought in to this when I made my First panels and I used aluminium tape and have had little to no issues in the First 7 years that I used it.
Since then, starting in 2010, I have been using a graphite based charge ring and I have had asolutely no issue what so ever yet!!

Here are a few threads describing my method and experience using the new process,

http://www.diyaudio.com/forums/planars-exotics/109789-esl-diaphragm-coating-7.html#post2142822

http://www.diyaudio.com/forums/planars-exotics/109789-esl-diaphragm-coating-7.html#post2078272

http://www.diyaudio.com/forums/planars-exotics/191266-must-do-all-esl.html#post2614029

http://www.diyaudio.com/forums/planars-exotics/191266-must-do-all-esl.html#post2614147

FWIW

jer :)
 

Attachments

  • Graphite charge ring.jpg
    Graphite charge ring.jpg
    574.2 KB · Views: 141
  • Graphite charge ring 2.jpg
    Graphite charge ring 2.jpg
    614.1 KB · Views: 131
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.