Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Planars & Exotics ESL's, planars, and alternative technologies

Repairing Acoustat 3s, or making 1+1s...
Repairing Acoustat 3s, or making 1+1s...
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 6th July 2012, 10:49 PM   #21
AcoustatAnswerMan is offline AcoustatAnswerMan  United States
diyAudio Member
AcoustatAnswerMan's Avatar
Join Date: Feb 2011
Location: Chandler Arizona
I will confirm that the center panel in a Model 3 is 8" wide, and the two outer panels are both 9" wide. As far as finding a replacement for the 8" panel: good luck. Not to say that they aren't available, but they are considerably more difficult to find that the 9" version.

The optimum listening position for any of the tall Acoustat models should be wherever your ears are, since they radiate equally from floor to ceiling. That is one of the beauties of that configuration. I use Spectra 4400's, and find the image and frequency response to be very stable whether I am seated or standing up. They even sound pretty good if you're laying on the floor (admittedly, not your preferred audiophile position)!

The 1+1 configuration will provide stereo imaging superior to that of any of the shorter models, but at a slight loss of efficiency and low bass response compared to the models with more panel area.

If I had to choose between a Model 3 and a Model 1+1, it would be a very easy decision for me - I would prefer the 1+1. This is an even easier decision if you already have equipment to augment the bottom end. I would recommend crossing over between 80-100 Hz, with a steep slope on the woofer system, and a first order slope (or no crossover at all!) on the ESL's.

One last thing - for the 1+1, change the low frequency transformer tap from orange (as configured for the Model 3) to the red tap, which is optimized for 2-panel systems.

Good luck...it sounds like a fun project.
  Reply With Quote


Repairing Acoustat 3s, or making 1+1s...Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Advice on new/used player + manual for Nakamichi MB-3s TDWesty Digital Source 4 9th January 2016 08:04 PM
Help .. Driver board of Starsound 15K (similar 3S-tech of Zenon, DD, GZ10000, etc.) turbo5 Class D 3 6th September 2010 08:58 PM
The ProAc Response 1S Clone tiefbassuebertr Multi-Way 2 25th March 2010 03:18 PM
Nakamichi MB-1s tbarse98 Digital Source 2 6th March 2010 03:58 AM
Mounting TO-3s Devil_H@ck Parts 7 30th March 2004 09:19 PM

New To Site? Need Help?

All times are GMT. The time now is 07:21 AM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.00%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright ©1999-2017 diyAudio