Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Planars & Exotics ESL's, planars, and alternative technologies

tubeamp outputtransformers 4, 8, 16 ohm for esl ?
tubeamp outputtransformers 4, 8, 16 ohm for esl ?
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 19th September 2010, 11:20 AM   #1
hironimo is offline hironimo  Switzerland
diyAudio Member
 
Join Date: Jun 2010
Default tubeamp outputtransformers 4, 8, 16 ohm for esl ?

hi

I found some tube amp kit at
RITTER electronic systems--Die Röhrenspezialisten seit 30 Jahren!

I would like to drive my esl panels
with some single-endet triode amp kit (V22 ,V40 )

my system is:
hybrid
2 toroidal transformers 1:65 , ( 2x 230/7 50Va)
regulated bias supply
one speaker consists of
4 panel each 6 inch x 10 inch ( 15 x 25 cm)
and one 16 x 20 inch ( 40 x 50 cm) panel ( I had spare parts so I made this additional panel and would conect all together)
60 mil d/s
a tl with a peerless sls10
coated with elvamide.

so but I'm not really sure which outputtransformers i should use 4 ,8, 16 ohm

thank you for any help

hironimo
Attached Images
File Type: jpg IMG_3584.jpg (132.1 KB, 82 views)
  Reply With Quote
Old 20th September 2010, 06:32 AM   #2
kavermei is offline kavermei  Belgium
diyAudio Member
 
kavermei's Avatar
 
Join Date: Jan 2005
Location: Lokeren, Belgium
Send a message via MSN to kavermei
there are conflicting demands -- for the woofer, 4 ohms is best (better damping factor).

For the ESL you need to know the voltage swing of the output tube and multiply that by the winding ratios of both transformers to see which one gets you closest to the voltage swing required by the ESL.
__________________
Never send a human to do a machine's job. --Agent Smith
  Reply With Quote

Reply


tubeamp outputtransformers 4, 8, 16 ohm for esl ?Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Matching my 8 ohm amp to 16 ohm speakers. DocJDG Solid State 9 21st April 2013 01:57 PM
Altec 806A 16 ohm to trade for 806 8A (8 ohm) diaphragms nelsondog Swap Meet 0 7th April 2010 01:32 AM
PHL Bass Midrange 8 ohm vs 16 ohm - same SPL: Why ? tiefbassuebertr Multi-Way 6 28th March 2010 07:14 PM
parallel wiring 16 ohm 4 ohm tobler Subwoofers 3 21st November 2005 05:28 AM
Two 4 ohm woofers in series or two 16 ohm in parallel. Which is better? Cal Weldon Multi-Way 16 21st February 2004 01:31 AM


New To Site? Need Help?

All times are GMT. The time now is 06:04 AM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.00%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Copyright ©1999-2018 diyAudio
Wiki