There are only very few AMT available for DIY - ESS, Eton, Mundorf, Beyma, Aurum Cantus (?) - and all are insane expensive given the easy construction.
Here is a new one from Harwood Acoustics called "AM 25 AIR MOTION" - welcome !
hifisound eShop * -* HARWOOD ACOUSTICS AM 25 AIR MOTION * A
Seems not much more data available at the moment except a short test in a German magazine where shown data (CSD in particular) look even a little bit better.
Low distortion even up to high levels not exactly on par to competitors but almost
Michael
Here is a new one from Harwood Acoustics called "AM 25 AIR MOTION" - welcome !
hifisound eShop * -* HARWOOD ACOUSTICS AM 25 AIR MOTION * A
An externally hosted image should be here but it was not working when we last tested it.
Seems not much more data available at the moment except a short test in a German magazine where shown data (CSD in particular) look even a little bit better.
Low distortion even up to high levels not exactly on par to competitors but almost
Michael
Last edited:
In the mentioned magazine there are two other AMT form Harwood Acoustics advertised called AM30 and AM35.
They are bigger (150x110mm 180x100mm), have increased sesitivity (~1dB ~2dB), increased power handling (100W 120W) and more are expensive (plus EUR 100.- 200.-)
Didn't find any additional data for those...
Michael
They are bigger (150x110mm 180x100mm), have increased sesitivity (~1dB ~2dB), increased power handling (100W 120W) and more are expensive (plus EUR 100.- 200.-)
Didn't find any additional data for those...
Michael
Last edited:
what parts of the AMT could that possibly be - and - how much time would that steps actually consume ?
I mean
- usually you have the magnets plus top and bottom plate
- the diaphragm in its frame plus glued terminals
anything else?
Last edited:
I think the Harwood AM25 is a OEM or a relabeled Aurum Cantus AST2560 and its bigger brother are relabeled Aurum Cantus AST30100 and AST30130. The have the same size and looks just the same.
Aurum cantus
Aurum cantus
And who builds the Aurum Cantus drivers
In China you really don't know.
But it looks like that the are developed by Jinlang Audio. But were they are manufactured
Same thing with the Hygeia Aero Striction Tweeters and Ribbons. Looks like a lot of well known brands are just relabeled Hygeia ribbons.
Claus
The Who: Won't get fooled again, on the Cd at the moment
Theres a new AMT available for the DIYer:
Expolinear OHT-25
according to a German DIY magazine its EUR 76.-/ each,
Looks like to be the same tweeter used in some of the ADAMS monitors.
It does not seem to be possible to convert to dipole operation easily, FR is a little bit rugged.
Telling from plots, with some EQing might be it could be used up from 3kHz reaching out to roughly 30kHz (on axis)
THD isn't as exceptional as the expensive AMT's though
Michael
Expolinear OHT-25
according to a German DIY magazine its EUR 76.-/ each,
Looks like to be the same tweeter used in some of the ADAMS monitors.
It does not seem to be possible to convert to dipole operation easily, FR is a little bit rugged.
Telling from plots, with some EQing might be it could be used up from 3kHz reaching out to roughly 30kHz (on axis)
THD isn't as exceptional as the expensive AMT's though
Michael
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.