Hi
I have a pair of the ones from Stryke they are the same driver
Here's a clio nearfield measurement plot of one
As you can see they are pretty soft in the high frequencies, and don't go very low. Some people are using them in 2-ways. I think that's a little foolish. They would make a nice cheap line array.
I have a pair of the ones from Stryke they are the same driver
Here's a clio nearfield measurement plot of one
An externally hosted image should be here but it was not working when we last tested it.
As you can see they are pretty soft in the high frequencies, and don't go very low. Some people are using them in 2-ways. I think that's a little foolish. They would make a nice cheap line array.
I'm not using them.They're in the basemet gathering dust. I'd hoped for a flatter more extended top end.
Tried them in this test baffle hoping to extend the HF above the B&G planars. But they have almost identical top end roll-off as the RD-75's
Tried them in this test baffle hoping to extend the HF above the B&G planars. But they have almost identical top end roll-off as the RD-75's
An externally hosted image should be here but it was not working when we last tested it.
that was a picture that i wasn't picturing. uh, that is actually scarey. hope your neighbors like you.
want to get rid of those pt2's for like free? of course i will pay for shipping. you know, since they are gathering dust and all. no, just name a price and you can email me. thanks,
hien@bignetworks.com
hien
want to get rid of those pt2's for like free? of course i will pay for shipping. you know, since they are gathering dust and all. no, just name a price and you can email me. thanks,
hien@bignetworks.com
hien
Unfortunately that's exactlly what we discoverd
Here's a link to the first prototype baffle. It's abit more refined than the simple test baffle.
Grey
Where/ how did you get just the Maggie ribbons?
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.