Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Planars & Exotics ESL's, planars, and alternative technologies

Reducing volume of planar tweeter
Reducing volume of planar tweeter
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 12th November 2008, 03:46 PM   #1
tubesmuggler is offline tubesmuggler  Canada
diyAudio Member
Join Date: Apr 2005
Location: Ontario
Default Reducing volume of planar tweeter

I own speakers that allow the tweeter output to be manually adjusted by connecting a resistor across terminals mounted at the rear of the speaker. Anything from a straight wire for no attenuation, to several ohms is acceptable depending on one's taste and all are 5W rated. What I'd like to try to rig up is a rotary switch with 6 or more different resistor values so that I don't have to power down everything, change resistors, power up and listen again. It's too difficult/slow to fine tune.

My problem now is that I have no idea what current rating the switch must be and I'm hoping someone here can help me with this. I think a DPDT, 6 pos. rotary is what I need, but at what current rating for it's contacts? I use 10W/ch to 20W/ch rated amplifiers.

thanks for any help!
  Reply With Quote
Old 12th November 2008, 09:20 PM   #2
Ed Holland is offline Ed Holland  England
diyAudio Member
Join Date: Dec 2004
Location: Mountain View, California
At only 20W potential max amplifier power, I think you'd be safe with any switch with a 1A or higher rating. There is less power in the treble signal usually, so I'd be surprised if you ever needed 8W of treble - an assumption based on an 8 ohm tweeter impedance drawing 1 amp through the switch.

  Reply With Quote
Old 12th November 2008, 09:29 PM   #3
Cal Weldon is offline Cal Weldon  Canada
diyAudio Moderator
Cal Weldon's Avatar
Join Date: Jan 2004
Location: Near Vancouver
Reducing volume of planar tweeter
Wouldn't a rotary L-pad do the trick?
planet10 needs your help:
Let's help Ruth and Dave
  Reply With Quote
Old 17th November 2008, 06:52 PM   #4
bear is offline bear
expert in tautology
diyAudio Member
bear's Avatar
Join Date: Apr 2002
Location: New York State USA
Reducing volume of planar tweeter
If you connect a resistor or network of resistors that changes the impedance seen by the passive xover the xover point will shift in frequency. So it is important to preserve the impedance when doing this, unless it is just for experimentation to determine a relative level between the tweeter and whatever else is playing...

That means an "L" network at least.

I wouldn't use a variable "L Pad" myself, if this is for a "serious listening" type system, as the point contact in the L Pad is not to my personal liking...

For just testing, almost any switch will do fine. I use clip leads for testing such things myself.

For permanent use a FAT contact rotary switch is bound to be preferable to a standard toggle switch, especially if you hot switch. That will cause arcing, and the wiping switch is self cleaning, the toggle is not. A relay might be a sweeter way to go, multiple contacts, and this permits remote switching back at the listening position too.

There are several discussions of relay types and sources for speaker level uses that you can search here on DiyAudio...

http://www.bearlabs.com -- Btw, I don't actually know anything, FYI -- every once in a while I say something that makes sense... ]
  Reply With Quote


Reducing volume of planar tweeterHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
dayton pt2 planar tweeter huj69 Planars & Exotics 9 16th December 2014 03:12 PM
Help with Raidho Planar tweeter compressit Planars & Exotics 6 18th April 2008 01:56 AM
Reducing output of tweeter bawang Multi-Way 2 16th November 2006 02:27 AM
Reducing volume? barendh Solid State 16 5th September 2006 03:00 PM
planar tweeter joz Planars & Exotics 0 31st March 2003 05:25 PM

New To Site? Need Help?

All times are GMT. The time now is 01:52 AM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 16.67%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright ©1999-2017 diyAudio