Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Planars & Exotics ESL's, planars, and alternative technologies

DIY Air Motion Transformer idea
DIY Air Motion Transformer idea
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 3rd March 2008, 02:26 AM   #1
woody is offline woody
diyAudio Member
 
Join Date: Jan 2002
Location: Tyrone Ga. U.S.A.
DIY Air Motion Transformer idea
Default DIY Air Motion Transformer idea

Long ago in 1977 The Audio Amateur had an article on how to
build an air motion transformer. Realy there were 2 examples
a midrange tweeter and a tweeter. Just for the heck of it I even
built a small one. The bigest problem was getting magnets. Well
magnets now are a lot cheaper. If I still had that article I might
be tempted to build another one.
  Reply With Quote
Old 3rd March 2008, 05:03 AM   #2
roddyama is offline roddyama  United States
diyAudio Moderator Emeritus
 
roddyama's Avatar
 
Join Date: Jan 2002
Location: Michigan
Back issues of Audio Amateur are available at the Audio Xpress web site, including the 1977 issues.
__________________
Rodd Yamashita
  Reply With Quote
Old 23rd March 2008, 02:58 PM   #3
Neil Davis is offline Neil Davis  United States
diyAudio Member
 
Join Date: Dec 2004
Location: Reston, Virginia
DIY Air Motion Transformer idea
There was a follow-up to that article one or two issues later that described how to etch the diaphragm. Etching is much easier, but getting the fine traces for the small diaphragm requires a good resist technique. The article described how to use tape as an etch resist, but this approach was far from perfect, as the etchant would get under the tape or else the pattern could tear while removing the tape.

A more promising approach would be using paint and a template like the one in the picture. Someday when I get the time I'm going to give this a try.
Click the image to open in full size.
  Reply With Quote

Reply


DIY Air Motion Transformer ideaHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Beyma TPL-150 air motion transformer StigErik Planars & Exotics 5 12th July 2009 12:05 PM
PS idea: isolating transformer from load ErikdeBest Tubes / Valves 6 10th January 2009 09:08 PM
DIY Air Motion Transformer OliverD Multi-Way 55 10th April 2005 01:28 AM


New To Site? Need Help?

All times are GMT. The time now is 04:52 AM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 16.67%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright ©1999-2017 diyAudio
Wiki