SATA to Gpio - diyAudio
Go Back   Home > Forums > Source & Line > PC Based
Home Forums Rules Articles diyAudio Store Gallery Wiki Blogs Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

PC Based Computer music servers, crossovers, and equalization

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 22nd January 2016, 03:37 PM   #1
diyAudio Member
 
Join Date: Oct 2011
Location: ITALY
Default SATA to Gpio

Hi, do someone knows if it's possible to connect a sata/esata ecc. hard drive to a gpio port on a minipc board?
In this case i'm asking about a Odroid C1+ !
  Reply With Quote
Old 22nd January 2016, 03:42 PM   #2
diyAudio Member
 
Join Date: Mar 2014
Short answer no. USB with an adaptor is about your only option.
  Reply With Quote
Old 22nd January 2016, 03:53 PM   #3
diyAudio Member
 
Join Date: Oct 2011
Location: ITALY
Ok, it's what i was afraid of....
Do you know a powerfull enough (likeC1+)sbc pc with sata connector?
  Reply With Quote
Old 22nd January 2016, 04:24 PM   #4
diyAudio Member
 
Join Date: Mar 2007
Location: California
Yep, the Orange Pi Plus has SATA onboard:
Click the image to open in full size.

See: Orange Pi - Orange Pi Plus
__________________
"Hardware eventually fails. Software eventually works" - Michael Hartung
ACD LADSPA plugins - implements IIR digital crossover filters under Linux (e.g. on a Raspberry Pi, miniPC, etc.)
  Reply With Quote
Old 22nd January 2016, 05:02 PM   #5
phofman is offline phofman  Czech Republic
diyAudio Member
 
Join Date: Apr 2005
Location: Pilsen
That SATA chip is a regular USB-SATA convertor Xunlong Orange Pi Plus - linux-sunxi.org
  Reply With Quote
Old 22nd January 2016, 05:46 PM   #6
diyAudio Member
 
Join Date: Mar 2007
Location: California
Quote:
Originally Posted by phofman View Post
That SATA chip is a regular USB-SATA convertor Xunlong Orange Pi Plus - linux-sunxi.org
Thanks for pointing that out!
__________________
"Hardware eventually fails. Software eventually works" - Michael Hartung
ACD LADSPA plugins - implements IIR digital crossover filters under Linux (e.g. on a Raspberry Pi, miniPC, etc.)
  Reply With Quote
Old 22nd January 2016, 10:54 PM   #7
diyAudio Member
 
Join Date: Oct 2011
Location: ITALY
In other words the sata input use the same usb bus!??!?!
So it's useless?!?!?
  Reply With Quote
Old 23rd January 2016, 06:12 PM   #8
phofman is offline phofman  Czech Republic
diyAudio Member
 
Join Date: Apr 2005
Location: Pilsen
I was not able to google out output of lsusb command for this board. It would tell you which USB controller is the USB-SATA bridge hooked to. The H3 block diagram H3_Allwinner Technology talks about 3 USB hosts, I would assume 3 independent USB controllers (i.e. busses).
  Reply With Quote
Old 24th January 2016, 12:13 PM   #9
diyAudio Member
 
Join Date: Oct 2011
Location: ITALY
It seems that the odroid c1+ have an indipendent mini usb too, someone say on a second bus, but i'm not able to verify it!
  Reply With Quote
Old 24th January 2016, 01:07 PM   #10
phofman is offline phofman  Czech Republic
diyAudio Member
 
Join Date: Apr 2005
Location: Pilsen
A lsusb -t output would tell all the details.
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
FS: 4TB SATA Hard Drives JP Swap Meet 3 1st April 2015 01:07 PM
SATA Cable toufu Digital Source 3 20th August 2010 08:54 AM
SATA to IDE adaption Lostcause Everything Else 12 7th September 2007 01:24 PM
Adding a SATA HDD LED DragonMaster Everything Else 9 7th August 2005 04:38 AM
SATA or SCSI jleaman Parts 0 19th September 2003 12:29 AM


New To Site? Need Help?

All times are GMT. The time now is 07:12 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.
Copyright 1999-2016 diyAudio

Content Relevant URLs by vBSEO 3.3.2
Wiki