|PC Based Computer music servers, crossovers, and equalization|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
||Thread Tools||Search this Thread|
|4th March 2015, 06:07 AM||#1|
Join Date: Mar 2015
Diy Amplifier Build for PC
Hello everyone here, I am going to make custom Amplifier for speakers. I know very well about computer hardware but limited to circuits and all about parts of electronics.
What I Have?
Desktop 2GB ram, Dual core 2.8, On board Audio
Stereo input (RCA)
Control Panel Functions
Volume, Bass & Treble Controls
2 Satellite speakers
Total RMS Power Output
40 Watts RMS max.
Sub-Woofer RMS Power
20 Watts RMS max.
Satellite RMS Power
10 Watts RMS each
Sub-woofer Driver Unit
4.5 inch Full range woofer driver
Satellite Driver Unit
3 inch Full range speaker driver
Woofer - 20Hz~200Hz, Satellites - 100Hz~20kHz
>= 45dB (1KHz)
Separate 4 speakers from giant Old TV
What I Have Done?
I have broken amplifier circuit board in Sub-Woofer. Everything is fine beside green circuit board which is broken too badly and it can't be repaired
What I Want To Do Now?
1 I want to make it work again by putting high quality custom amplifier circuit board for best sound possible or Build separate amplifier and attach whole setup with it
2 Optional - Is it possible to make 5.1 ch systems as i have 4 separate speakers, sound very good.
What I Want To Know?
There are many types of amplifiers. Can you post info or useful links for classification, pros and cons all of them.
Note - Move My Thread to Appropriate Category if Posted in Wrong Section.
Last edited by symbian41; 4th March 2015 at 10:54 AM.
|Thread Tools||Search this Thread|
|Thread||Thread Starter||Forum||Replies||Last Post|
|I want to build a 1-2W class a amplifier for use in a 5,25" pc expansion slot||Shamron||Solid State||8||27th April 2013 12:53 PM|
|LM1876T diy HiFi amplifier build, questions, PCB, components, so on..||Mihkus||Chip Amps||12||27th January 2013 04:25 PM|
|DIY Design and Build Overvoltage Input Amplifier Protection. HElp!!!||thomgun_lc||Instruments and Amps||1||1st October 2009 02:49 AM|
|DIY Hi-Fi PC power amplifier (Live..)||gxcnabin||Solid State||30||23rd September 2009 05:08 AM|
|build my first full ranger,let's build another one:a small fullrange high end pc-spea||then_dude||Full Range||2||30th November 2005 07:54 AM|
|New To Site?||Need Help?|