|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| PC Based Computer music servers, crossovers, and equalization |
  |
|
|
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
 |
|
|
Thread Tools | Search this Thread |
8th August 2011, 05:20 PM
|
#1 |
|
diyAudio Member
Join Date: Jul 2004
Location: Belgium-Europe
|
Oxmoor Deq I equalizer programming (rs-422)
Hello to all;
I obtained some Oxmoor Deq I equalizers (Ex-Imax) and like to program them via a laptop and a rs-422 interface. I do have the software "Tweeq95" but can't communicate with the Deq I. Error message is "Deq not found". It can be done manually via switches inside the unit but i like the challenge to do it via a laptop. Does anybody have the schematic of the Oxmoor Pa-422 interface or tips on how to do it with a conventional rs232/rs422 interface? I suspect my cabling and/or serial port settings. Many thanks in advance. jorre@skynet.be |
|
|
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| tektronix type 422 question | toobnoob | Equipment & Tools | 0 | 8th October 2009 09:44 AM |
| W-422 Information | danloani | Full Range | 0 | 28th May 2007 03:14 PM |
| Pinout of a UTC CG-422 power transformer | korneluk | Tubes / Valves | 0 | 27th November 2006 11:01 PM |
| RS Labs RS-A1 Tonearm New Unused Boxed | mozfet | Swap Meet | 4 | 6th September 2004 10:51 PM |
| New To Site? | Need Help? |
