Best USB->I2S Option? - Page 3

Jackal29a · 23rd August 2011, 08:22 PM

Here it says different:

Bulk Transfer Mode in Musiland Monitor Devices H i F i D U I N O

Unless they have changed something that is, in that case, could you please provide a link with the information?

Cheers

vuki · 23rd August 2011, 09:11 PM

No it doesn't. Musiland monitor series uses asynchronous bulk transfer.
More about USB transfer modes

Jackal29a · 10:49 PM

But as in Adaptive-out or Async-OUT that allows the use of an 'external master clock' to control the flow rate?
I think I got it, It doesn't use usbaudio.sys, it works as if it was an external hard drive or printer, correct?

vuki · 24th August 2011, 06:36 AM

Quote:

Originally Posted by Jackal29a

But as in Adaptive-out or Async-OUT that allows the use of an 'external master clock' to control the flow rate?
I think I got it, It doesn't use usbaudio.sys, it works as if it was an external hard drive or printer, correct?

I think so.

audiodesign · 6th February 2012, 12:14 PM

Until now the best is the M2Tech but I still need to test XMOS.

ANADIGIT · 13th February 2012, 05:31 AM

Lindemann USB-DDC 24/192 from TENOR TE8802L is the best I've tested.

borges · 13th February 2012, 12:12 PM

Hi guys,

just to let you know, there is a lot of activity over at
Open-source USB interface: Audio Widget

There is even an open-source Windows ASIO driver in the works.

Børge

SoNic_real_one · 13th February 2012, 03:41 PM

TENOR TE8802L does not "do" 88.2 or 176.4 or 192 KHz.

ANADIGIT · 14th February 2012, 12:57 AM

Quote:

Originally Posted by SoNic_real_one

TENOR TE8802L does not "do" 88.2 or 176.4 or 192 KHz.

TENOR suported all of range you said :-) I used it now.

qusp · 14th February 2012, 08:06 AM

XMOS based reigns supreme in my experience. its much more flexible regarding clocking IMO

23rd August 2011, 10:29 PM	#23
Jackal29a diyAudio Member Join Date: Jan 2011 Location: Madrid - Spain	But as in Adaptive-out or Async-OUT that allows the use of an 'external master clock' to control the flow rate? I think I got it, It doesn't use usbaudio.sys, it works as if it was an external hard drive or printer, correct? Last edited by Jackal29a; 23rd August 2011 at 10:49 PM.

13th February 2012, 12:12 PM	#27
borges diyAudio Member Join Date: Dec 2003 Location: Oslo, Norway	Hi guys, just to let you know, there is a lot of activity over at Open-source USB interface: Audio Widget There is even an open-source Windows ASIO driver in the works. Børge __________________ === AB-1.2 and USB-I2S Module === Audio Widget readme ===

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Hiface USB -> I2S 24bit/192Khz	audiodesign	Group Buys	367	26th May 2010 12:00 PM
Does USB->I2S make sense ?	percy	Digital Line Level	20	24th March 2009 01:23 AM
Direct Wiring a DDDAC USB-->I2S to a P3A DAC I2S DIN input	dkj7a	Digital Source	1	26th March 2006 05:46 PM
Pcm2707 Usb->i2s	Rocky	Digital Source	0	21st October 2005 01:35 AM
PCM2707 USB-->I2S how to use etc.	nl	Digital Source	4	5th August 2005 12:29 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

23rd August 2011, 08:22 PM	#21
Jackal29a diyAudio Member Join Date: Jan 2011 Location: Madrid - Spain	Here it says different: Bulk Transfer Mode in Musiland Monitor Devices H i F i D U I N O Unless they have changed something that is, in that case, could you please provide a link with the information? Cheers

23rd August 2011, 09:11 PM	#22
vuki diyAudio Member Join Date: Jun 2002 Location: zagreb, croatia	No it doesn't. Musiland monitor series uses asynchronous bulk transfer. More about USB transfer modes

6th February 2012, 12:14 PM	#25
audiodesign diyAudio Member Join Date: Sep 2005	Until now the best is the M2Tech but I still need to test XMOS.

13th February 2012, 05:31 AM	#26
ANADIGIT diyAudio Member Join Date: Nov 2008	Lindemann USB-DDC 24/192 from TENOR TE8802L is the best I've tested.

13th February 2012, 03:41 PM	#28
SoNic_real_one diyAudio Member Join Date: Jan 2008 Location: Virginia	TENOR TE8802L does not "do" 88.2 or 176.4 or 192 KHz.

14th February 2012, 08:06 AM	#30
qusp is choosing a less facetious title... diyAudio Member Join Date: Oct 2009 Location: Brisbane, Australia	XMOS based reigns supreme in my experience. its much more flexible regarding clocking IMO