XBOSOZ Transformer

Pathmark · 29th March 2007, 03:53 PM

I plan on using (2) 2x20 antek transformers. 3 x 20 for +60V and 1x20 for -20V.

Two basic questions:

(1) Is the wiring for +60 as simple +-+-+- ? Means 1 wire for Pos, 4 wires to gnd and 1 wire for Neg.

(2) If using two psu boards of twisted bosoz does that mean I actually need 4 transformers not just 2 for stereo.

Thanks,
Pathmark

jupiterjune · 29th March 2007, 11:15 PM

you might want to post a schematic of what you mean in question 1.....

29th March 2007, 03:53 PM	#1
Pathmark diyAudio Member Join Date: Jan 2007	XBOSOZ Transformer I plan on using (2) 2x20 antek transformers. 3 x 20 for +60V and 1x20 for -20V. Two basic questions: (1) Is the wiring for +60 as simple +-+-+- ? Means 1 wire for Pos, 4 wires to gnd and 1 wire for Neg. (2) If using two psu boards of twisted bosoz does that mean I actually need 4 transformers not just 2 for stereo. Thanks, Pathmark

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
A little XBOSOZ help	Pathmark	Pass Labs	9	17th May 2007 12:37 AM
Xbosoz HELP (Karis PCB)	trango	Pass Labs	50	22nd August 2006 08:12 PM
XBOSOZ psu query/problem	dhole	Pass Labs	20	22nd May 2006 05:08 AM
xbosoz pre probs	dhole	Pass Labs	1	2nd September 2005 03:11 PM
Aleph 1.7 or CCS-XBOSOZ	FrankDIY	Pass Labs	1	10th March 2004 08:19 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

29th March 2007, 11:15 PM	#2
jupiterjune diyAudio Member Join Date: Nov 2006	you might want to post a schematic of what you mean in question 1.....

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)