I am building a BOZ and would like to use fixed resistors(instead
of 100k pot) at input,my power amp need 1.25v for full output. What value seem to be a good choice.
Also it seem that EB on TIP 29c are in reverse position if TIP29c
is well BCE(as per original article TAA/94 and Pass Lab site.
Thanks for your help.
of 100k pot) at input,my power amp need 1.25v for full output. What value seem to be a good choice.
Also it seem that EB on TIP 29c are in reverse position if TIP29c
is well BCE(as per original article TAA/94 and Pass Lab site.
Thanks for your help.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.