Walter's handcrafted AlephX cases

WALTER BURKHARD · 15th March 2007, 05:24 PM

New Cases for X-Amp´s

WALTER BURKHARD · 15th March 2007, 05:25 PM

Cases for X-Amp´s

WALTER BURKHARD · 15th March 2007, 05:29 PM

4 Cases for X-Amp´s

WALTER BURKHARD · 15th March 2007, 05:30 PM

Cases for X-Amp´s

WALTER BURKHARD · 15th March 2007, 05:33 PM

My Design for X-Amps, weight are near 40kg!For bigger pictures contact over may email.

hc167 · 15th March 2007, 06:27 PM

hi WALTER BURKHARD:

very nice case, I am also making an Pass Aleph amp. and I just wondering in your pictures, you have a half constructed chassis and a drill, do you actually drill all those hole with that drill, or you use a drill press? I am now in progress of selecting a nice inexpensive drill press.

WALTER BURKHARD · 15th March 2007, 06:37 PM

hi hc167
i use this the drill for fixing the srews.It´s impossible for drilling all this cases!!! May be u can check by Wuerth in USA to find wath u need ?????

http://www.wurthusa.com/project/en/l.../hardware.html

regards Walter

hc167 · 15th March 2007, 07:16 PM

do you mean you do not drill it yourself but have someone drill it for you? I do not understand what you mean

Jan Dupont · 15th March 2007, 07:39 PM

Very nice cases, Walter

DUC985 · 15th March 2007, 08:17 PM

Walter, where do you get those nice heatsinks in Germany, i'm searching for a while to get them in Germany ?

thx

15th March 2007, 07:39 PM	#9
Jan Dupont diyAudio Member Join Date: Apr 2003 Location: Copenhagen, Denmark	Very nice cases, Walter __________________ Free Schematic and Service Manual downloads www.audio-circuit.dk, Company: www.dupont-audio.com, Joint venture: www.DupontMantra.com

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Materials Technology for Electron Tubes by Walter H. Kohl	7n7is	Tubes / Valves	21	3rd July 2007 12:01 AM
AlephX PSU- need help	bach2800	Pass Labs	6	6th July 2006 09:53 PM
AlephX with 610?	ijomojo	Pass Labs	3	1st September 2005 04:45 PM
Best 1st amp:AlephX, 5 or a Zen?	rif	Pass Labs	7	15th April 2004 04:56 PM
Walter G. Jung's Energy Storage Bank	Tony	Solid State	15	5th July 2003 09:10 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

15th March 2007, 06:27 PM	#6
hc167 diyAudio Member Join Date: Oct 2006	hi WALTER BURKHARD: very nice case, I am also making an Pass Aleph amp. and I just wondering in your pictures, you have a half constructed chassis and a drill, do you actually drill all those hole with that drill, or you use a drill press? I am now in progress of selecting a nice inexpensive drill press.

15th March 2007, 06:37 PM	#7
WALTER BURKHARD diyAudio Member Join Date: Dec 2002 Location: Helsinki	hi hc167 i use this the drill for fixing the srews.It´s impossible for drilling all this cases!!! May be u can check by Wuerth in USA to find wath u need ????? http://www.wurthusa.com/project/en/l.../hardware.html regards Walter

15th March 2007, 07:16 PM	#8
hc167 diyAudio Member Join Date: Oct 2006	do you mean you do not drill it yourself but have someone drill it for you? I do not understand what you mean

15th March 2007, 08:17 PM	#10
DUC985 diyAudio Member Join Date: Oct 2004 Location: NRW	Walter, where do you get those nice heatsinks in Germany, i'm searching for a while to get them in Germany ? thx

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)