Pass Labs S/Ns ?

dejanm · 22nd January 2007, 08:52 PM

Hi,

I have the opportunity to buy a S/H Pass Labs X150.5. The seller told me that the unit is only 6 months old but I would like to check this information. Not that I do not believe him, but it would be not bad to know it for sure.

Is there any site where I could find out the production year of the unit, based on Serial Number that I've got from seller ?

Regards
Dejan

MikeW · 22nd January 2007, 08:59 PM

Send an e-mail to Pass Labs

dejanm · 24th January 2007, 08:35 AM

Thanks Mike ... I did what you suggested but Pass doesn't reply ...

Any other ideas ?

lineup · 24th January 2007, 09:21 AM

Quote:

Originally posted by dejanm
Thanks Mike ... I did what you suggested but Pass doesn't reply ...

Any other ideas ?

He has probably too many mails in inbox.
And is easy to get lost in all spams he get.

If he sees your post here, I am sure he will try to answer.
Or maybe somebody else would know how to figure out what you want to know:
------------------------------------------------
Second Hand Pass Labs X150.5.
The seller told me that the unit is only 6 months old
but I would like to check this information.
Not that I do not believe him, but it would be not bad to know it for sure.

Is there any site
where I could find out the production year of the unit,
based on Serial Number that I've got from seller ?

dejanm · 24th January 2007, 05:07 PM

To be honest I didn't write directly to Mr. Pass, because I didn't want to bother him with these typical sales stuff... So I sent the mail to foreign_sales@passlabs.com. And they didn't answer ... yet ....

MikeW · 24th January 2007, 05:37 PM

I am sure he will get back to you. Sometimes it takes a while.

moe29 · 24th January 2007, 06:18 PM

If it looks good cosmetically and is operational buy it! Pass amps are
built like little tanks

And it should have a multi-year warranty.
Go for it! My second (or third?) hand Aleph 3 has been cooking right along for over 5 years now.

Nelson Pass · 24th January 2007, 08:58 PM

The foreign sales address isn't probably the best one for you.
I suggest peter@passlabs.com

dejanm · 26th January 2007, 08:35 AM

Thanks Nelson. That was really the right address. Prompt reaction from Peter helped a lot to resolve this issue.

By the way - the unit was 3,5 years old ...

Regards
Dejan

22nd January 2007, 08:52 PM	#1
dejanm diyAudio Member Join Date: Jul 2005 Location: Vienna	Pass Labs S/Ns ? Hi, I have the opportunity to buy a S/H Pass Labs X150.5. The seller told me that the unit is only 6 months old but I would like to check this information. Not that I do not believe him, but it would be not bad to know it for sure. Is there any site where I could find out the production year of the unit, based on Serial Number that I've got from seller ? Regards Dejan

22nd January 2007, 08:59 PM	#2
MikeW diyAudio Member Join Date: Sep 2002 Location: North of Boston	Send an e-mail to Pass Labs __________________ MikeW

24th January 2007, 05:37 PM	#6
MikeW diyAudio Member Join Date: Sep 2002 Location: North of Boston	I am sure he will get back to you. Sometimes it takes a while. __________________ MikeW

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
FS: Pass Labs X-250	jtwrace	Swap Meet	0	17th June 2007 03:20 AM
My opinion on Pass Labs and Mr. Pass (Nelson) himself	b_online	Pass Labs	11	21st May 2003 01:39 AM


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

24th January 2007, 08:35 AM	#3
dejanm diyAudio Member Join Date: Jul 2005 Location: Vienna	Thanks Mike ... I did what you suggested but Pass doesn't reply ... Any other ideas ?

24th January 2007, 05:07 PM	#5
dejanm diyAudio Member Join Date: Jul 2005 Location: Vienna	To be honest I didn't write directly to Mr. Pass, because I didn't want to bother him with these typical sales stuff... So I sent the mail to foreign_sales@passlabs.com. And they didn't answer ... yet ....

24th January 2007, 06:18 PM	#7
moe29 diyAudio Member Join Date: Dec 2002 Location: Florida	If it looks good cosmetically and is operational buy it! Pass amps are built like little tanks And it should have a multi-year warranty. Go for it! My second (or third?) hand Aleph 3 has been cooking right along for over 5 years now.

24th January 2007, 08:58 PM	#8
Nelson Pass The one and only Join Date: Mar 2001	The foreign sales address isn't probably the best one for you. I suggest peter@passlabs.com

26th January 2007, 08:35 AM	#9
dejanm diyAudio Member Join Date: Jul 2005 Location: Vienna	Thanks Nelson. That was really the right address. Prompt reaction from Peter helped a lot to resolve this issue. By the way - the unit was 3,5 years old ... Regards Dejan

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read