Sorry Nelson, but can I use this pot with the default resistor values?? (I absolutely don't want to make any error in the building!!)
Potentiometer
Potentiometer
Albertone,
http://www.digikey.com
Ref# 490-2979-ND
Murata TRIMPOT CERM 25K OHM 12TRN TOP 250mW
http://rocky.digikey.com/WebLib/Murata/Web Data/PV37 series.pdf
As a good example...
Alain.
http://www.digikey.com
Ref# 490-2979-ND
Murata TRIMPOT CERM 25K OHM 12TRN TOP 250mW
http://rocky.digikey.com/WebLib/Murata/Web Data/PV37 series.pdf
As a good example...
Alain.
Albertone,
Are we speaking of P1 the pot in the lower left of the schematic ex Fig #6
The point is each channel has to be adjusted separately
and the current in this pot is < 0.75 mA
so why not ; but quite overkill....
{plus to find the sweet pot of the second channel you'll have to add a separate
pot on one channel, not really easy}
And a 12, 15 or 20 turns will be much more easy to adjust !!!
Alain.
Are we speaking of P1 the pot in the lower left of the schematic ex Fig #6
The point is each channel has to be adjusted separately
and the current in this pot is < 0.75 mA
so why not ; but quite overkill....
{plus to find the sweet pot of the second channel you'll have to add a separate
pot on one channel, not really easy}
And a 12, 15 or 20 turns will be much more easy to adjust !!!
Alain.
Albertone said:Ok, now I understand
You must be a guy who always sleep in the classroom . . .
Don't make too much watermark on books
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Amplifiers
- Pass Labs
- Zen ZV9 Question