diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Pass Labs (http://www.diyaudio.com/forums/pass-labs/)
-   -   What speakers match the Aleph 1.2s? (http://www.diyaudio.com/forums/pass-labs/89508-what-speakers-match-aleph-1-2s.html)

folkeb 2nd November 2006 10:19 AM

What speakers match the Aleph 1.2s?
 
I have recently finnished my Aleph 1.2 project, including a upgrade of the decoupling cap to a BG N. I didn't believe one cap could change the sound to the extent it did. Anyway. I have tested the Aleph on several speakers (Dynabel Euforia and JBLs). However, I can't say I have found a good match yet. Can you please recommend speakers that are known to be a good match?

Thanks!

Best regards,
Folke

SRMcGee 2nd November 2006 12:01 PM

folkeb:

I am driving a pair of Eggleston Andras with my Pass Labs Aleph 1.2 monoblocks, and they sound terrific. I wrote a review of the Aleph 1.2s a few years ago that also described my search for worthy speakers: http://db.audioasylum.com/cgi/m.mpl?forum=amp&n=28070

Your tastes will certainly differ from mine, but throw whatever you can find at your amps -- they really bring the best out of loudspeakers.

Regards,
Scott

folkeb 2nd November 2006 01:28 PM

My problem is that I can't afford such expensive equipment, hence the DIY effort. Are there any other speakers that match at a lower price? The sound is not bad at all with my current setup, but I can clearly hear the limitations of the speakers. It is quite loose in the bass region and the same can be said for the Alephs sound. The midrange and up is just brilliant. I also have a small room - typically 20 sqm. This will limit my options a bit. Any other good matches for the alephs?

What about the B&W nautilus range? Any clones out there?

;)

oblerum 13th June 2008 01:33 AM

Hello!

Better late than never, I have never heard the 1.2's with Martin Logan's, a pal of mine bought my pair of Martin Logan SL3's and they sound wonderful with the Aleph 5's.

Soon finnished with my Aleph 1.2 clones i hope (builded the Aleph 5 first with a pal of mine). I have some trouble at my mainboard, with just 0volts over T4 (KK's-PCBs),so it is probably past summer before they are finnished.


All times are GMT. The time now is 08:53 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2