Zen circuit boards for sale.

pixie · 9th February 2001, 04:22 PM

I have decided to build a double Zen + a Bride.

So, I have two custom circuit boards etched and populated by me. They comprise the constant current source and the signal amplifier sections of the amp (2/3 of the Zen Revisited). The MOSFETs were mounted to the heat sinks and hard wired to these boards. But, I fried them. The amp still works, but it produces a little static. I used all premium parts, all rated higher than Pass says. I'll replace the R11 with the right one, so you don't fry yours too.

I estimate the value of these boards to me is about $50 in parts. So, if someone offers me $30, they're yours.

Otherwise, I'll just use them in my new amp. So, don't offer too much less than that. The only reason I'm considering selling is to make my new amp neater with only one board for both amps.

pixie

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
alw regulator circuit boards	fmak	Solid State	1	3rd December 2008 04:11 PM
Crossover Circuit Boards	berserker	Parts	1	7th November 2007 02:17 AM
Pearl circuit boards	spuddy42	Pass Labs	5	17th November 2006 08:57 AM
Cleaning circuit boards	jrv1965	Everything Else	6	20th February 2006 07:28 AM
Circuit boards, another dirty way to do!	destroyer X	Solid State	75	21st January 2005 06:53 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

9th February 2001, 04:22 PM	#1
pixie diyAudio Member Join Date: Oct 2000 Location: Austin, Texas, USA	I have decided to build a double Zen + a Bride. So, I have two custom circuit boards etched and populated by me. They comprise the constant current source and the signal amplifier sections of the amp (2/3 of the Zen Revisited). The MOSFETs were mounted to the heat sinks and hard wired to these boards. But, I fried them. The amp still works, but it produces a little static. I used all premium parts, all rated higher than Pass says. I'll replace the R11 with the right one, so you don't fry yours too. I estimate the value of these boards to me is about $50 in parts. So, if someone offers me $30, they're yours. Otherwise, I'll just use them in my new amp. So, don't offer too much less than that. The only reason I'm considering selling is to make my new amp neater with only one board for both amps. pixie

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)