DIY Gene on eBay - Aleph 5 boards - Page 3 - diyAudio
Go Back   Home > Forums > Amplifiers > Pass Labs

Pass Labs This forum is dedicated to Pass Labs discussion.

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Closed Thread
 
Thread Tools Search this Thread
Old 27th December 2006, 12:58 PM   #21
Zen Mod is offline Zen Mod  Serbia
diyAudio Member
 
Zen Mod's Avatar
 
Join Date: Jan 2003
Location: ancient Batsch , behind Iron Curtain
Quote:
Originally posted by banzas
I received the pcbs, they are very well made, the schematic is a copy of aleph, they replaced the mpsa18 with 42, and had more two final outputs fets than the original sch. The delay protection is simple but efective.
Here you can see my last tube SE project enjoy!
tubes: 211, 300b, 6sn7, Amp, PSU 5u4 and 3B28 xenon rectifier

OK,banzas;
he obviously ripped NP;
so-now can be your turn:

scan schematic with protection,scan pcb and publish both here,so DIY community can have some benefit ;

off course-if NP don't have complains against that.......in that case mods can delete posts
__________________
my Papa is smarter than your Nelson !
clean thread; Cook Book;PSM LS Cook Book;Baby DiyA ;Mighty ZM's Bloggg;Papatreasure;Papa... by Mighty ZM
 
Old 27th December 2006, 01:32 PM   #22
steenoe is offline steenoe  Denmark
diyAudio Member
 
steenoe's Avatar
 
Join Date: Mar 2004
Quote:
scan schematic with protection,scan pcb and publish both here,so DIY community can have some benefit ;
I agree, lets rip the ripper and send him an email with a link to this thread

Steen
 
Old 27th December 2006, 01:53 PM   #23
Zen Mod is offline Zen Mod  Serbia
diyAudio Member
 
Zen Mod's Avatar
 
Join Date: Jan 2003
Location: ancient Batsch , behind Iron Curtain
Quote:
Originally posted by steenoe

I agree, lets rip the ripper and send him an email with a link to this thread

Steen

talking about ripping.....
what you think-what is fair,I repeat-fair, price for pair of Oly's Babelfish pcbs?

I have few requests for pcbs,even with published pdf.....
I really don't want to rip NP's IP in any ( at least commercial ) way,but I'm also aware that Oly's work must be rewarded in some way......


hehe...I certainly will not make any parallel with your generous reward
__________________
my Papa is smarter than your Nelson !
clean thread; Cook Book;PSM LS Cook Book;Baby DiyA ;Mighty ZM's Bloggg;Papatreasure;Papa... by Mighty ZM
 
Old 27th December 2006, 02:15 PM   #24
diyAudio Member
 
gmilitano's Avatar
 
Join Date: Apr 2004
Location: Winnipeg, Manitoba
Be a good eBayer and report the listing.

Scroll to the bottom of the auction page, click "Report this item" and fill out the questions.

Once eBay sees a handful of complaints, they will investigate.
Attached Images
File Type: png report.png (15.3 KB, 1978 views)
 
Old 27th December 2006, 03:13 PM   #25
steenoe is offline steenoe  Denmark
diyAudio Member
 
steenoe's Avatar
 
Join Date: Mar 2004
Quote:
fair, price for pair of Oly's Babelfish pcbs?
I would say at least in the pricerange of a pair of KK-boards. Since the Babbelfish boards are handmade, probably 1 set at the time its not even that small a work. Besides that, Oly is a wiz making boards. They are superb. Since its him making the boards, he should be payed a fair price for the work. Its hard to put a price on them. Determining factor is, if you and Oly feel its worthwhile.

Steen
 
Old 27th December 2006, 06:46 PM   #26
Zen Mod is offline Zen Mod  Serbia
diyAudio Member
 
Zen Mod's Avatar
 
Join Date: Jan 2003
Location: ancient Batsch , behind Iron Curtain
Quote:
Originally posted by steenoe

I would say at least in the pricerange of a pair of KK-boards. Since the Babbelfish boards are handmade, probably 1 set at the time its not even that small a work. Besides that, Oly is a wiz making boards. They are superb. Since its him making the boards, he should be payed a fair price for the work. Its hard to put a price on them. Determining factor is, if you and Oly feel its worthwhile.

Steen
tnx steen........I have same opinion regarding that,even if I know that I'll have difficulties to force Oly to take any sum of money from me.....he thinks about that as personal favor to me,but I don't want to abuse his good will .......


anyway.....do you like xmass present from me ?

at least beginning of entire present......
__________________
my Papa is smarter than your Nelson !
clean thread; Cook Book;PSM LS Cook Book;Baby DiyA ;Mighty ZM's Bloggg;Papatreasure;Papa... by Mighty ZM
 
Old 27th December 2006, 11:12 PM   #27
diyAudio Member
 
Holger Barske's Avatar
 
Join Date: Jan 2001
Location: Ruhrgebiet
Quote:
Be a good eBayer and report the listing.
Well, I did. Hope some others will follow.
__________________
Best regards: Holger
www.holgerbarske.com - Deutschsprachiges Paradise-Support-Forum
 
Old 27th December 2006, 11:15 PM   #28
steenoe is offline steenoe  Denmark
diyAudio Member
 
steenoe's Avatar
 
Join Date: Mar 2004
Quote:
Hope some others will follow.
I did

Steen
 
Old 28th December 2006, 01:15 AM   #29
banzas is offline banzas  Portugal
diyAudio Member
 
Join Date: Aug 2004
Location: Coimbra
Hi,
I need to scan the sch. But I am out for a few days, so be patient.
 
Old 28th December 2006, 01:41 AM   #30
Zen Mod is offline Zen Mod  Serbia
diyAudio Member
 
Zen Mod's Avatar
 
Join Date: Jan 2003
Location: ancient Batsch , behind Iron Curtain
Quote:
Originally posted by banzas
Hi,
I need to scan the sch. But I am out for a few days, so be patient.

pcb too ;

if files are too large-I'll host it for some time,make pdfs of them -for diy benefit ;

anyway,who need schmtc only..........

hehe,I realy don't need neither one
__________________
my Papa is smarter than your Nelson !
clean thread; Cook Book;PSM LS Cook Book;Baby DiyA ;Mighty ZM's Bloggg;Papatreasure;Papa... by Mighty ZM
 

Closed Thread


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
L/R Boards and Matched IRFP240 Boards for Aleph/ A-X lgreen Swap Meet 7 25th August 2009 04:56 AM
Pass Aleph 1.7 boards, Zhaolu 2.5A, P700 VRDS, UGS PS boards, dac chips analog_sa Swap Meet 4 14th March 2009 05:29 PM
Regulator boards (on ebay) Nathan A. Swap Meet 0 2nd June 2006 11:28 PM


New To Site? Need Help?

All times are GMT. The time now is 01:20 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2