diyAudio (
-   Pass Labs (
-   -   Unclear schematics (

folkeb 18th July 2006 04:41 PM

Unclear schematics
I am about to connect up the Aleph 1.2 monoblock. However, the schematics from KK are confusing. How should I connect the main board to the gain and current pcbs?

Should D-D, S-S, G-G and R,R or is this wrong? On the schematic he says that this should be done, but the drawing shows something else.

Here is a photo of the cards:

On the schematic he says that for the constant current PCB the following connections should be made:
d-d, g-s, s-g, r-r.

and on the gain pcb:
d-r, g-g, s-s, r-d

I'm sorry for the poor description. But can anyone help me clarify this before I short something!?!


folkeb 18th July 2006 10:29 PM

I sent a mail to KK and he replied that the circute should be connected D-D, S-S and so on...


All times are GMT. The time now is 10:32 AM.

vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2015 DragonByte Technologies Ltd.
Copyright 1999-2015 diyAudio

Content Relevant URLs by vBSEO 3.3.2