Boz Irf610 Pin?

tone · 28th November 2002, 01:26 PM

can someone tell me which the 3 pin leg is S/G/D for the IRF610 and the TIP29C?thanks..

woody · 28th November 2002, 01:31 PM

If you go to the digikey web page and do a part search for
the irf610 it will also list a data sheet pdf that has a picture
of the pinout. I have found this feature on the digikey web
page most helpfull.

Regards,

bob12345678 AKA Woody

UrSv · 28th November 2002, 01:34 PM

I think for the TIP29C you will want to look for C, B and E.

As for the pins on the IRF610 the previous suggestion is good or you may find it any of the sites for manufacturers of that transistor.

/UrSv

bawang · 28th November 2002, 01:34 PM

Looking at the front of the transistor (printed with the transistor number), left to right:
For IRF610: Gate, Drain, Source. TIP29C: Base, Collector, Emitter. The tab of both transistors are connected to the center pin.

halojoy · 28th November 2002, 02:00 PM

If looking at the transistor mounted on the heatsink
it is BCE or corresponding GDS for mosfet
from left to right.

This is a standard used by 90%(?) of all TO220 devices
so if you remember BCE, from left to right
you will know.
BCE is easy to remember -
it is in alphabetical order.

BCE can also be called Gate Drain Source.
The function is the same.

tone · 29th November 2002, 04:00 AM

rgds,
tone

28th November 2002, 01:26 PM	#1
tone diyAudio Member Join Date: Aug 2002 Location: Malaysia	Boz Irf610 Pin? can someone tell me which the 3 pin leg is S/G/D for the IRF610 and the TIP29C?thanks..

28th November 2002, 02:00 PM	#5
halojoy On Hiatus Join Date: Nov 2002	bawang is right If looking at the transistor mounted on the heatsink it is BCE or corresponding GDS for mosfet from left to right. This is a standard used by 90%(?) of all TO220 devices so if you remember BCE, from left to right you will know. BCE is easy to remember - it is in alphabetical order. BCE can also be called Gate Drain Source. The function is the same.

29th November 2002, 04:00 AM	#6
tone diyAudio Member Join Date: Aug 2002 Location: Malaysia	Thanks Guys!! rgds, tone

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
A .model for IRF610?	Onvinyl	Parts	0	17th October 2007 11:57 AM
Help Problem With IRF610	dytln_02	Solid State	8	7th June 2006 05:14 PM
IRF610 replacement	sherwood	Pass Labs	24	24th July 2005 02:08 PM
Matching IRF610's	TomT	Pass Labs	18	23rd January 2004 08:29 PM
Looking for IRF610 and IRF9620	omar	Swap Meet	0	23rd October 2003 05:49 AM


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

28th November 2002, 01:31 PM	#2
woody diyAudio Member Join Date: Jan 2002 Location: Tyrone Ga. U.S.A.	If you go to the digikey web page and do a part search for the irf610 it will also list a data sheet pdf that has a picture of the pinout. I have found this feature on the digikey web page most helpfull. Regards, bob12345678 AKA Woody

28th November 2002, 01:34 PM	#3
UrSv diyAudio Member Join Date: Jan 2002 Location: Sweden	I think for the TIP29C you will want to look for C, B and E. As for the pins on the IRF610 the previous suggestion is good or you may find it any of the sites for manufacturers of that transistor. /UrSv

28th November 2002, 01:34 PM	#4
bawang diyAudio Member Join Date: Oct 2001 Location: Malaysia	Looking at the front of the transistor (printed with the transistor number), left to right: For IRF610: Gate, Drain, Source. TIP29C: Base, Collector, Emitter. The tab of both transistors are connected to the center pin.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read