diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Pass Labs (http://www.diyaudio.com/forums/pass-labs/)
-   -   Improvements (http://www.diyaudio.com/forums/pass-labs/80338-improvements.html)

lplateaudio 27th May 2006 09:43 AM

Improvements
 
2 Attachment(s)
Hello All!!

Came across this design, I like it but maybe there are areas for improvement!

Like BJT BC546B, hes just to noisy for my liken
changing to BC550C must be a good choice

Whats your ideas??
I have two 625 trannies, one for each mono

Thanks for your input:wiz: :cheers: :cheers: :cheers: :worship:

freakyone 18th June 2006 12:29 AM

Hello lplate

I to am using this design, in fact just populating the board.
im using BC 546B for Q2,Q3,Q8,Q9.
Any progress in your decision/s of the improvment/s

Has any one elsed used this design?

Cheers Dan

eapavant 18th June 2006 01:10 PM

http://www.diyaudio.com/forums/showt...748&highlight=

http://www.diyaudio.com/forums/showt...threadid=28336

gl 19th June 2006 05:31 PM

Hi lplateaudio,

There is no evidence that Kristian actually prototyped that circuit before he made the layout. Selling boards is how he makes his living. Hopefully some builders will post their experiences with this circuit. Then you will have some hard facts.

The two threads referenced by eapavant are the two reference threads on the Aleph-X. Anyone building an Aleph-X needs to read and understand these threads in order to make any informed design decisions on the circuit. You need to develop your own judgement ability. There is a great deal of information and mis-information on the Aleph-X. In my personnal opinion I suspect that there are issues with Kristians 100W circuit. I emphasize the words "personal opinion" and "suspect".

When I undertook to build a 100W version of the Aleph-X I decided to completely re-read the two main threads and use the information they contain to develop my own cicuit. The resulting amps are documented here:

http://www.diyaudio.com/forums/showt...543&highlight=

Regarding your question about the 625VA transformer; it should probably work OK. Back when the A40 came out the rule of thumb for class A amps was to duoble the idle dissipation wattage to come up with an approximation for the transformer rating. In recent years the popular number has grown to 3 times or even more. If you already have the transformers I'd say go ahead and use them.

Cheers,
Graeme


All times are GMT. The time now is 03:34 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2