diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Pass Labs (http://www.diyaudio.com/forums/pass-labs/)
-   -   Twisted Sibling - THS4131 based preamp/buffer/SE-BAL converter (http://www.diyaudio.com/forums/pass-labs/79930-twisted-sibling-ths4131-based-preamp-buffer-se-bal-converter.html)

Russ White 21st May 2006 01:20 AM

Twisted Sibling - THS4131 based preamp/buffer/SE-BAL converter
 
2 Attachment(s)
Hello All, I am not sure where this blenongs. It is a design based on a chip, but it is also in no small part brought to us by our friend Nelson Pass, so i have posted it here. If this is not correct, moderators feel free to move it.

Twisted Sibling.

Hello Friends,

It was not long ago I read that Texas Instruments had licensed from Nelson Pass the rights to produce products based on his Super Symmetry intellectual property.

Well I was very pleased about that as it meant the very likely we (the DIY community) now have a very widely available fabulous basis for many incredible projects to come. We would at last have a fully symmetric device on which to build many interesting applications. Well as it turns out several devices to choose from.

One such device is the THS413X. Which has some amazing specs. I will not regurgitate the data sheet for you here, instead I will tell you what I decided to do with what turns out to be a fantastic chip.

Basically I made a circuit that behaves very much like our (actually Terry Aben's) Twisted XBOSOZ, but in a very much smaller much more convenient package(1.5 x 4). This project has been about two months in the making as has now been tested and found to be even more than I had ever hoped it would be.

The designed circuit is a mono amplifier/buffer which can be used with single ended or balanced input and single ended or balanced output. It can be used to directly feed something like a Super Symmetrical chipamp such as the one Terry Aben was so kind to share with us and I am now listening to. The circuit can also simply be used as an excellent compact SE to balanced converter.

The circuit has exceptional PSRR and CMRR which is phenomenal. Distortion figures and simulates very low indeed (<-110 db 3rd order in the audio range). I have not been able to actually test my circuit yet, but my ears tell me that the data sheet has not disappointed. the circuit will easily outperform the best current feedback conventiuonal opamps such as the AD815 and be much easier to live with to boot. No nasty offset to deal with by using a servo or by injecting current from the supply rail.

But I do not have to talk about numbers or pie in the sky claims. The circuit is very easy to build!!! :) I will share my research freely here in the true spirit of DIY audio, I am not divulging trade secrets or anything one could not easily glean from various online sources. The only thing I expect in return is that people enjoy the project. Sure I worked hard on this, not I did not invent anything.

The Circuit has some incredibly useful features. Look it over for yourself.

Here are some highlights:

1)High input impedance with optional low pass filter which makes it an ideal line stage to follow a Sigma Delta (or any voltage output) DAC such as the one I am working on now.
2)Extremely low output impedance.
3)High output current capability (up to 150ma).
4)Very low voltage noise.
5)High slew rate.
6)High bandwidth.
7)Very low harmonic distortion.
8)SE to balanced conversion is simple(Tie -In to GND).

This would be a great font end to many bridged or bridged/parallel amps.

Here is the completed prototype which is driving a SuSy chipamp. It is setup for 2X gain. The front end is a AD8620 which is configured as a instrumentation amp along with the THS4131. You could use any unity gain stable dual op amp which is good for audio on the front end.

I could go on and on about the results, but you would never believe me. Please build one for yourself. I think you like me may just be speechless.

I will post single sided PCB PDFs which are free for DIY use.

I will post the schematic.

I look forward to lots of feedback.

Lets start with the schematic:

Russ White 21st May 2006 01:23 AM

2 Attachment(s)
Here is my finished protytpe.

Yes its ugly, but its a prototype. The circuits are the two on the right. :)

Russ White 21st May 2006 01:25 AM

2 Attachment(s)
Here is a 3D rendering of the board with the PCB itself transparent so you can see the ICs on the bottom as well as the top components. It is upside down.

Ed LaFontaine 21st May 2006 02:33 AM

Russ, Russ, Russ,

Have you been cuttin' the grass again?:D

Wow! nice rendering also

By the way, which of the many available packages..er..ah..Which suffix (at the end of 4131) did you use to put this together?

Russ White 21st May 2006 02:37 AM

Quote:

Originally posted by Ed Lafontaine
By the way, which of the many available packages..er..ah..Which suffix (at the end of 4131) did you use to put this together?
Ha,

This time of year cutting grass is unavoidable. :)

I used THS4131CD in my prototype. They are SOIC. I have been using a hot plate and solder paste to solder my SMD parts lately. Wow, does it make it easy.

Cheers!
Russ

Russ White 21st May 2006 02:47 AM

BTW sorry for all the gramatical and spelling errors. I should have proof read my pssstss .:D :xeye: :bigeyes: :bawling:

jleaman 21st May 2006 03:40 AM

Quote:

Originally posted by Russ White
BTW sorry for all the gramatical and spelling errors. I should have proof read my pssstss .:D :xeye: :bigeyes: :bawling:

Is this a buffer for balanced Signals ?

Russ White 21st May 2006 11:41 AM

Quote:

Originally posted by jleaman



Is this a buffer for balanced Signals ?


Jason, functionally, it works like XBOSOZ.

To make it a buffer R2A and R2B would be very low value or a jumper. Rg and Rf would be 390R.

Cheers!
Russ

Russ White 22nd May 2006 10:16 PM

Preamp playing nicely. :)
 
2 Attachment(s)
Just thought I would share iamges of the finished preamp. I am Giving it a thorough shakdown. :D

Inside from front:

Russ White 22nd May 2006 10:18 PM

2 Attachment(s)
Inside from rear.


All times are GMT. The time now is 07:53 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2