|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Pass Labs This forum is dedicated to Pass Labs discussion. |
  |
|
|
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
 |
|
|
Thread Tools | Search this Thread |
10th February 2006, 11:34 PM
|
#1 |
|
diyAudio Member
Join Date: Dec 2004
Location: Cincinnati, Ohio
|
Why Pass Labs uses electrolytics.
Heres an Aleph 2 for a 16 ohm speaker I'm working on. R19 and C10 are pulled, C5 and C9 are 250uF metallized polypropylenes. Z5 is bypassed by a 4.7uF met poly. Planned rails are 57V. Board is Class A Amplifier Aleph Clone, BrianGT.
__________________
Be sure your foil hat has a good low impedance ground. |
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Pass Labs D1 | maartentje | Pass Labs | 83 | 5th October 2009 01:32 PM |
| FS: Pass Labs X-250 | jtwrace | Swap Meet | 0 | 17th June 2007 02:20 AM |
| Pass Labs S/Ns ? | dejanm | Pass Labs | 8 | 26th January 2007 07:35 AM |
| pass labs | sss | Pass Labs | 5 | 6th October 2003 06:23 AM |
| My opinion on Pass Labs and Mr. Pass (Nelson) himself | b_online | Pass Labs | 11 | 21st May 2003 12:39 AM |
| New To Site? | Need Help? |
| Page generated in 0.06818 seconds (67.50% PHP - 32.50% MySQL) with 11 queries |
