Class A mosfet amp builders in Queensland Australia?

gregjpeters · 6th November 2002, 06:08 AM

Hello all,

I am interested in building a Class A solid state amp such as the Zen or Aleph 5. Are there any people in Brisbane, Australia who have experience in this regard? If so, I would love to hear from you to discuss construction/parts etc. I will be at the hamfest down the Gold Coast this weekend. I am also very into Tesla Coils, and have a rather large one (12 foot arcs) that I am always looking for an excuse to run.

Cheers,

Greg.

AudioFreak · 6th November 2002, 11:24 AM

Good luck to you Greg, I'm in North Queensland. If you're interested, I have recently ordered a large quantity of International Rectifier IRFP240's (suitable for most of the Pass Labs projects) for a number of projects that I have planned. The parts should arrive to me within a fortnight and I'll be selling matched sets by the end of this month if things go to plan.

Regards,
Daniel Flynn.

Mark Hathaway · 6th November 2002, 08:55 PM

Audiofreak,

did you order them locally?

thanks,

Mark Hathaway
Melbourne

AudioFreak · 6th November 2002, 09:46 PM

Yes, I ordered them from Arrow Electronics in Brisbane, but after talking to them, due to a lack of stock locally, the parts are being sent from the manufacturer (they are due to arrive within a fortnight). I also have IRF610, IRF9610 and MPSA18 sourced from Digikey. Initially, I will only be shipping within Australia but I plan to be able to supply international orders at a later date.

I'll post more details once everything is ready to go.

6th November 2002, 06:08 AM	#1
gregjpeters diyAudio Member Join Date: Nov 2002 Location: Brisbane, Australia	Class A mosfet amp builders in Queensland Australia? Hello all, I am interested in building a Class A solid state amp such as the Zen or Aleph 5. Are there any people in Brisbane, Australia who have experience in this regard? If so, I would love to hear from you to discuss construction/parts etc. I will be at the hamfest down the Gold Coast this weekend. I am also very into Tesla Coils, and have a rather large one (12 foot arcs) that I am always looking for an excuse to run. Cheers, Greg.

6th November 2002, 08:55 PM	#3
Mark Hathaway diyAudio Member Join Date: May 2002 Location: Melbourne, Australia	mosfet supplier Audiofreak, did you order them locally? thanks, Mark Hathaway Melbourne

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Gooday from Queensland	waricle	Introductions	4	21st November 2007 02:07 PM
tube pre amp mods in queensland, australia	soundfan	Tubes / Valves	1	15th September 2007 06:14 AM
Frugel-horn builders in Australia?	Brisso57	Full Range	0	8th July 2007 07:53 AM
Of interest to Class-D amp scratch builders	FastEddy	Class D	3	18th February 2007 05:42 PM
Hello from sunny Queensland	Wombat2	Introductions	1	26th November 2003 09:49 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

6th November 2002, 11:24 AM	#2
AudioFreak Warp Engineer On Holiday Join Date: Oct 2001 Location: Queensland, Australia	Good luck to you Greg, I'm in North Queensland. If you're interested, I have recently ordered a large quantity of International Rectifier IRFP240's (suitable for most of the Pass Labs projects) for a number of projects that I have planned. The parts should arrive to me within a fortnight and I'll be selling matched sets by the end of this month if things go to plan. Regards, Daniel Flynn.

6th November 2002, 09:46 PM	#4
AudioFreak Warp Engineer On Holiday Join Date: Oct 2001 Location: Queensland, Australia	Yes, I ordered them from Arrow Electronics in Brisbane, but after talking to them, due to a lack of stock locally, the parts are being sent from the manufacturer (they are due to arrive within a fortnight). I also have IRF610, IRF9610 and MPSA18 sourced from Digikey. Initially, I will only be shipping within Australia but I plan to be able to supply international orders at a later date. I'll post more details once everything is ready to go.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)