Aleph P 1.7 Help?

dod996 · 7th February 2006, 01:47 AM

Does anyone have the parts list for this Aleph P 1.7 Power Supply?

Thanks.
Tony

Holger Barske · 7th February 2006, 10:26 AM

Looks like a board from Kristijan.
You might find this helpful: http://www.kk-pcb.com/a17-pwr.html

dod996 · 7th February 2006, 11:04 AM

My pcb is a little bit different than the one he has posted on his site . I think it's one of his older versions. I'm not really sure what the values are for the small caps.

Tony

Holger Barske · 7th February 2006, 11:55 AM

Nothing wrong with 1000µ/63V.

dod996 · 7th February 2006, 05:55 PM

I don't think I can fit 1000uf caps in the c3 and c4 positions on the board.

Tony

Holger Barske · 7th February 2006, 06:56 PM

You're right. Seems like 1/10" spacing between the holes.
Perhaps you could post a pic of the board's copper side, so we can figure out what exactly the caps are for.

7th February 2006, 10:26 AM	#2
Holger Barske diyAudio Member Join Date: Jan 2001 Location: Ruhrgebiet	Looks like a board from Kristijan. You might find this helpful: http://www.kk-pcb.com/a17-pwr.html __________________ Best regards: Holger www.holgerbarske.com

7th February 2006, 11:04 AM	#3
dod996 diyAudio Member Join Date: Jan 2005 Location: Pa	Aleph p1.7 My pcb is a little bit different than the one he has posted on his site . I think it's one of his older versions. I'm not really sure what the values are for the small caps. Tony

7th February 2006, 11:55 AM	#4
Holger Barske diyAudio Member Join Date: Jan 2001 Location: Ruhrgebiet	Nothing wrong with 1000µ/63V. __________________ Best regards: Holger www.holgerbarske.com

7th February 2006, 06:56 PM	#6
Holger Barske diyAudio Member Join Date: Jan 2001 Location: Ruhrgebiet	You're right. Seems like 1/10" spacing between the holes. Perhaps you could post a pic of the board's copper side, so we can figure out what exactly the caps are for. __________________ Best regards: Holger www.holgerbarske.com

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

7th February 2006, 05:55 PM	#5
dod996 diyAudio Member Join Date: Jan 2005 Location: Pa	I don't think I can fit 1000uf caps in the c3 and c4 positions on the board. Tony

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
First version Aleph 0 (Null, ZERO, O, Os, 0s) versus later Aleph versions	tiefbassuebertr	Pass Labs	13	27th April 2012 02:13 AM
Aleph (Single Ended) + Larvadin (no Memory Distortion) = Ultimate Aleph?	tiefbassuebertr	Pass Labs	17	9th January 2012 02:10 PM
Mini Aleph Board & Aleph 2 Parts List	gpsmithii	Pass Labs	3	16th January 2010 03:58 AM
First version Aleph 0 (Null, ZERO, O, Os, 0s) versus later Aleph versions	tiefbassuebertr	Pass Labs	0	6th August 2009 11:11 AM
PCBs for Aleph 2, Aleph 3, Aleph 4 and Aleph 5 amplifiers	kristijan-k	Swap Meet	64	12th September 2002 07:55 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read