X-CCS-BOSOZ Parts GB - diyAudio
Go Back   Home > Forums > Amplifiers > Pass Labs

Pass Labs This forum is dedicated to Pass Labs discussion.

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 25th January 2006, 06:04 AM   #1
diyAudio Member
 
promitheus's Avatar
 
Join Date: Jan 2001
Location: Germany
Default X-CCS-BOSOZ Parts GB

While am waiting for my X-CCS-BOSOZ boards to arrive I am looking for parts.
For those who havent started yet with building their preamp I want to ask if anybody is interested in a small group buy for some important parts.
What I can get at very good prices are the following.

Mundorf Caps from every series. 10uF-33uF

Toroid transformer with shielding and magnetic shield high end quality.
2x55V 2x9v at 50-160VA or
custom made
1x55V+1x9V
http://www.schuro.de/Downloads/PDF-P...MS-SW_I_BR.pdf

Heatsinks

Mills resistors for the 3-5W parts

Vishay-Dale CMF-55 special edition antimagnetic

Caps could also be provided depending on the quantity.

If you have any ideas or requests please tell me.

I will be ordering anyway so even if the group order doesnt start at least I can buy some parts for a few people.
  Reply With Quote
Old 25th January 2006, 06:17 AM   #2
lgreen is offline lgreen  United States
diyAudio Member
 
lgreen's Avatar
 
Join Date: May 2003
Location: San Diego, USA
Default bosoz

Are you sure you are actually getting the boards or did I miss something and the boards arrived?

EDIT- ok I see your other post now. Wow, I must be spending too much time here when I start memorizing people and their topics. Sorry.

EDIT#2 - ok, I see your next post, I understand.
  Reply With Quote
Old 25th January 2006, 06:39 AM   #3
diyAudio Member
 
promitheus's Avatar
 
Join Date: Jan 2001
Location: Germany
I will get the boards in the next days I didnt get them yet.
I started this thread separately to make a small group buy for some important parts if people still need parts.
  Reply With Quote
Old 25th January 2006, 06:52 AM   #4
diyAudio Member
 
Join Date: Dec 2004
Location: Roosendaal
Hi Promitheus,

I was thinking about ordering five Schuro trafo's with 60V outputs, and the 9V extra output. These would be applicable to both Kari boards which I will be using in my DAC, and the P1.7 I want to build as pre.

For now I am working with some older Thel trafo's, so I am not in a hurry and you still have to start on your boards. So when you want to order something from Schuro (and nobody else does) contact me.

Greetings, Harry
  Reply With Quote
Old 25th January 2006, 06:55 AM   #5
diyAudio Member
 
promitheus's Avatar
 
Join Date: Jan 2001
Location: Germany
You order 5 trafos you dont have to pay extra for the custom secondary.
  Reply With Quote
Old 25th January 2006, 10:25 AM   #6
diyAudio Member
 
Join Date: Oct 2002
Location: Holland, The Hague
I might be interrested in 2 trannies for my Twisted X-Bosoz boards. Personally I prefer a bit oversized toroids. Any ideas on the price?
__________________
Is that all there is?
  Reply With Quote
Old 25th January 2006, 10:44 AM   #7
diyAudio Member
 
Hanzwillem's Avatar
 
Join Date: Nov 2002
Location: Hengelo, The Netherlands
I might be interested in some parts depending on the price. I would most probably need at least the power supply. I haven't decided yet one what type of resistors I will use.
Also, I would need the 10V reference IC's LM4040-10. Conrad does not have them...

Now the boards seem to be arriving, I have a lot of FET matching to do...
__________________
They must have been holy chips or something - Pedro
  Reply With Quote
Old 25th January 2006, 11:39 AM   #8
diyAudio Member
 
Join Date: Oct 2004
I would be interested in all the parts you mentioned promitheus. Could you elaborate on the good price a bit? Better than Schuro? I'd be interested in resistors for Aleph-X too.

BTW are the Mills available from some place in Europe?
  Reply With Quote
Old 25th January 2006, 02:10 PM   #9
diyAudio Member
 
promitheus's Avatar
 
Join Date: Jan 2001
Location: Germany
Mills are not easy to get.
Prices depend on the quantity.
Trafos and Vishay Resistors about the prices Schuro gives them unless I order a lot of them and we get a discount.
Mundorf I can sell them cheaper than Schuro.
Mills are available at www.partsconnexion.com
I order there a lot.
Heatsinks pretty cheap but good quality from Fischer Electronic.
I will make a list of parts and maximum prices in the next days and the possible maybe discount depending on total order at the end.

The voltage references are expensive.
I also have a lot of matched IRF610 and IRF9610 from other projects so I can also provide them too.

Are there other requests or suggestions?
Maybe I can make a list till the end of next week and see what we can order.

What are going using or going to use as input selection and volume control? This part puzzles me more then anything else.

If some of you need also other related parts for other projects I could also order them too.
Just send me an email so I can make the list.
  Reply With Quote
Old 26th January 2006, 01:38 PM   #10
diyAudio Member
 
promitheus's Avatar
 
Join Date: Jan 2001
Location: Germany
what would be better to use at the output caps.
22uF or 33uF?
I am tending to 22uF Mundorf MCap.
The maximum price would be 9,22 Euro a piece and maybe can get down to 7,86 Euro a piece.
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Parts GB for X-BOSOZ (KARI's Boards) Coulomb Group Buys 145 17th May 2006 04:52 AM
Choosing parts for BOSOZ pjpoes Pass Labs 9 27th March 2005 05:24 AM
SOZ, BoSoz Parts ralf Pass Labs 6 16th March 2002 05:29 AM
BOSOZ parts ?'s SteveA Pass Labs 7 22nd January 2002 06:08 PM


New To Site? Need Help?

All times are GMT. The time now is 06:47 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2