diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Pass Labs (http://www.diyaudio.com/forums/pass-labs/)
-   -   Vreg vs CCS - basic Zen question (http://www.diyaudio.com/forums/pass-labs/71650-vreg-vs-ccs-basic-zen-question.html)

m@ 13th January 2006 09:38 AM

Vreg vs CCS - basic Zen question
 
I was looking over everything Mr. Pass has on his DIY site and I have the following question:

The gain element in a Zen is fed by a Constant Current Source - which in turn is fed by a regulated Voltage supply. Could these two things be combined? Could there just be a central regulated current supply for both channels - or am i missing something basic here?

:confused:

jh6you 13th January 2006 10:21 AM

I believe that central regulated current supply for both channels for Zen will work.

I use centural PSU for both channels of my F1. Still, the left sound is on the left and the right on the right.

One bridge diode is ok for the central PSU. But, I use four of them in paralle because I somethimes like to apply my own "redundancy" rule. If one of them is open (probability 10%), the other three will still work. Two of them open (probability 1%)? The other two will still work. Three of them (probability 0.01%)? still the remaining one will work. Do not take this comment seriosly plz:)

Regards
jh


---
diyAudio seems to be getting ugly daybyday.
Whyno own forum inPassdiy . . . ?


All times are GMT. The time now is 02:05 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2