diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Pass Labs (http://www.diyaudio.com/forums/pass-labs/)
-   -   100W aleph-x integrated PCB layout (http://www.diyaudio.com/forums/pass-labs/69045-100w-aleph-x-integrated-pcb-layout.html)

Adams_Leo 3rd December 2005 11:50 AM

100W aleph-x integrated PCB layout
 
2 Attachment(s)
Hi all,

Due to my heat sinks,my friends and I have designed aleph-x integrated PCB layout.The board size is 310x102( mm ) and one channel's components in this board,please look into attached image file and give you suggestions.And your help will be highly appreciated.

Cheers.
Leo

analogair 11th December 2005 07:46 AM

Hi Leo
 
Looks great.

Which program did you guy's use.
I would sure like to make something similar.
But i'm not used to pcb design software :xeye:
perhaps you could post the files for the pcb

Carondimonio 11th December 2005 07:50 AM

Hi Leo,

your layout looks good. I just have one remark: the space for the power resistors looks too small to me, 3W and 5W resistors are usually much bigger than what they look like on your board.

Cheers,

Bruno

Adams_Leo 11th December 2005 11:29 AM

Re: Hi Leo
 
Quote:

Originally posted by analogair
Looks great.

Which program did you guy's use.
I would sure like to make something similar.
But i'm not used to pcb design software :xeye:
perhaps you could post the files for the pcb

We use the Prote 2004 DXP,If you need we can send the pcb fie to you.

Cheers
Leo

Adams_Leo 11th December 2005 11:51 AM

2 Attachment(s)
Quote:

Originally posted by Carondimonio
Hi Leo,

your layout looks good. I just have one remark: the space for the power resistors looks too small to me, 3W and 5W resistors are usually much bigger than what they look like on your board.

Cheers,

Bruno


Thanks for you suggestion,we have modified this.

Regards
Leo

analogair 17th December 2005 11:06 AM

guru guru
 
Leo, your pcb layout looks very nice.
Would it be possible to get the files.

Adams_Leo 16th February 2006 07:53 AM

relayout aleph-x 100W pcb
 
2 Attachment(s)
Relayout the aleph-x 100W pcb,Would you advise for this?

gl 16th February 2006 04:17 PM

Hi Adams_Leo,

This is a large board. Laying out a serious high current circuit is risky and can take more than one turn to get things right - even for an experienced PCB designer. I would recommend wiring your amp point-to-point on perf board. Then you can move things around easily if you run into problems.

I'm just trying to save you some money here. Board turns are expensive especially with big boards.

GL

Kari 17th February 2006 05:48 AM

Hi,
i've noticed that you use DXP for drawing the pcb. I'm also using DXP (Altium Designer 6.0). However i'm not able to find pcb footprints for heatsinks at all in the standard libraries. I see that you have them included in your board and i'm wondering if you could be so kind to send those libraries over?

Wonderful job on the layout!

Thx again,

Kari

Adams_Leo 17th February 2006 10:56 AM

Quote:

Originally posted by gl
Hi Adams_Leo,

This is a large board. Laying out a serious high current circuit is risky and can take more than one turn to get things right - even for an experienced PCB designer. I would recommend wiring your amp point-to-point on perf board. Then you can move things around easily if you run into problems.

I'm just trying to save you some money here. Board turns are expensive especially with big boards.

GL

Hi GL,thanks.
Leo
Quote:

Originally posted by Kari
Hi,
i've noticed that you use DXP for drawing the pcb. I'm also using DXP (Altium Designer 6.0). However i'm not able to find pcb footprints for heatsinks at all in the standard libraries. I see that you have them included in your board and i'm wondering if you could be so kind to send those libraries over?

Wonderful job on the layout!

Thx again,

Kari

Hi Kari,Please give your mail -box,I send the lib to you.
thanks
Leo


All times are GMT. The time now is 06:46 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2