Complementary Zen V.5 Transconductance Amp
I'm thinking of adapting the Zen V.5 for a current source amp project.
Should I reduce R1, remove R2, increase R3, R4, R5 and R6 by say a factor of 10,
and increase R9-R10 and R11-R12 to say 2 Ohm.?
I believe that would just about do it. You might have to adjust
R5/R3 and R6/R4 to get the bias current you want.
|All times are GMT. The time now is 04:29 PM.|
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.
Copyright ©1999-2016 diyAudio