Just went back in the thread and checked. Look closely here: http://www.diyaudio.com/forums/showthread.php?postid=763865#post763865
Normally the neg rail is done with the P-channel IRFP9610.
Steen.
Normally the neg rail is done with the P-channel IRFP9610.
Steen.
steenoe said:Just went back in the thread and checked. Look closely here: http://www.diyaudio.com/forums/showthread.php?postid=763865#post763865
Normally the neg rail is done with the P-channel IRFP9610.
Steen.
Doh!! Thanks Steenoe, I was looking atthe pre not the PS.
Easy enough to fix. Thanks for pointing that out!
Cheers!
Russ
Banned
Joined 2002
2+2
Steen.
Ps. Slight correction
Steen.
Ps. Slight correction
Mosfet's are N-channel and P-channelNPN and PNP just as it should be.
steenoe said:2+2
Steen.
Ps. Slight correction Mosfet's are N-channel and P-channel
Thanks Steenoe,
This is my first FET design, so I will need to catch up on the terminology.
Look like Most people will want 2x2 so I will probably make that the standard package. The good thing is even if you decide not to use the second PS you will have a goood one to use with another project.
Cheers!
Russ
- Home
- Amplifiers
- Pass Labs
- My Take on X-BOSOZ