diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Pass Labs (http://www.diyaudio.com/forums/pass-labs/)
-   -   Cl 60 (http://www.diyaudio.com/forums/pass-labs/65995-cl-60-a.html)

jeclk 14th October 2005 06:23 PM

Cl 60
 
Hi,

I found a NTC to replace the CL60 it makes 10ohm with 7.5 amp. can I put it to replace the CL60

rf.
EPCOS R25
(Ω) code
commande prix de lU.D.V.

B57364
-S0209M 2,0 211-8018 2,99
-S0259M 2,5 211-8024 1,33
-S0509M 5,0 211-8030 2,99
-S0100M 10 211-8002 2,99



www.radiospares.fr

Nelson Pass 14th October 2005 07:54 PM

Very likely.

jacco vermeulen 14th October 2005 10:10 PM

In case you do not have the B57364 NTC data yet :

temperature: -55 to +170 C
power rating: 5.1 watts at 25 C
heat conductivity in air : 24 mW/K
cooling time : ~100 seconds.

Pretty much like the General Electrics.

jeclk 18th October 2005 10:05 PM

thanks for corfirmations
:D

Blues 18th October 2005 10:32 PM

Quote:

Originally posted by jacco vermeulen
You want a V8 too, just afraid to admit it !


I must admit I want a W16!


All times are GMT. The time now is 11:39 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2