Which caps for aleph2's? (10pF and 1nF)

cowanrg · 1st October 2002, 10:17 PM

one last question for now...

what is the best quality cap i can get for the 1nf and 10pf on the boards? i got black gates for the 220uf value, but still looking for the other 2 values. is mica the right type? im just unfamiliar with what is good for this value and type... thanks guys!

Peter Daniel · 1st October 2002, 10:52 PM

If you check the latest Aleph X thread posts, you might not need those caps at all.

cowanrg · 1st October 2002, 10:53 PM

care to explain a little bit more?

i still need the 200uf ones right? because those are ordered :-)

ill read the post and see if i can find out what you are talking about...

mefinnis · 1st October 2002, 10:58 PM

The amp will likely be stable without these, but for the "average" builder I suspect NP would still recommend their use.

Mica will do just fine.

cowanrg · 1st October 2002, 10:59 PM

ok, i did the reading.

however, my boards are done, im using the ones from kristijan. i already have them, and am using the design as is. so given that, which type do i use? and is there a particular brand/type that will yield best/better results?

jh6you · 2nd October 2002, 12:27 PM

.

Dear cowanrg

I couldn't open http://www.diyprojectors.com.
Would you please kindly guide me how to open it?
There must be something to learn.
.

1st October 2002, 10:17 PM	#1
cowanrg diyAudio Member Join Date: Apr 2002 Location: Lafayette, CO	Which caps for aleph2's? (10pF and 1nF) one last question for now... what is the best quality cap i can get for the 1nf and 10pf on the boards? i got black gates for the 220uf value, but still looking for the other 2 values. is mica the right type? im just unfamiliar with what is good for this value and type... thanks guys!

1st October 2002, 10:52 PM	#2
Peter Daniel diyAudio Member Join Date: Jul 2002 Location: Toronto, Canada	If you check the latest Aleph X thread posts, you might not need those caps at all. __________________ www.audiosector.com “Do something really well. See how much time it takes. It might be a product, a work of art, who knows? Then give it away cheaply, just because you feel that it should not cost so much, even if it took a lot of time and expensive materials to make it.” - JC

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Aleph2 power supply caps	kop89	Pass Labs	17	16th January 2009 03:43 AM
Aleph2 pcb's, matched fets for aleph2 and aleph ono pcb's	MemphisJim	Swap Meet	1	23rd September 2005 07:15 PM
which brand n model for Aleph2 10pf mica?	louischia	Pass Labs	9	9th February 2004 12:54 AM
What's the difference between original aleph2 and DIY aleph2?	chris910	Pass Labs	3	17th August 2003 09:03 PM
CL 60 for Aleph2	jeclk	Pass Labs	1	21st October 2002 10:10 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

1st October 2002, 10:53 PM	#3
cowanrg diyAudio Member Join Date: Apr 2002 Location: Lafayette, CO	care to explain a little bit more? i still need the 200uf ones right? because those are ordered :-) ill read the post and see if i can find out what you are talking about...

1st October 2002, 10:58 PM	#4
mefinnis diyAudio Member Join Date: Feb 2001 Location: Adelaide, Australia	The amp will likely be stable without these, but for the "average" builder I suspect NP would still recommend their use. Mica will do just fine.

1st October 2002, 10:59 PM	#5
cowanrg diyAudio Member Join Date: Apr 2002 Location: Lafayette, CO	ok, i did the reading. however, my boards are done, im using the ones from kristijan. i already have them, and am using the design as is. so given that, which type do i use? and is there a particular brand/type that will yield best/better results?

2nd October 2002, 12:27 PM	#6
jh6you Account Disabled Join Date: Aug 2002 Location: Near to the Pacific Ocean	. Dear cowanrg I couldn't open http://www.diyprojectors.com. Would you please kindly guide me how to open it? There must be something to learn. .

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)