|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Pass Labs This forum is dedicated to Pass Labs discussion. |
  |
|
|
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
 |
|
|
Thread Tools | Search this Thread |
21st August 2001, 04:14 PM
|
#1 |
|
diyAudio Member
Join Date: Feb 2001
Location: Vancouver, B.C., Canada
|
a DACT CT-101 pre amp module? A friend has purchased the DACT and is thinking of using the power supply section of the BOSOZ.
The DACT requires a +24 0 -24 volt supply and I know that the BOSOZ PSU can be derated to lower voltages but I am unsure if it represents a + 0 - type supply. Any info is appreciated. Tony D. |
|
|
21st August 2001, 04:23 PM
|
#2 |
|
diyAudio Member
Join Date: Oct 2000
Location: Sweden
|
Yes it can be used, but you have to remove a couple of zener diodes. For example three 9.1V zener diodes (instead of six) in series will create 3 * 9,1V = 27,3V at the gate of the mosfet. This will create around 27,3 - 3,5 = 23,8V (The 3,5V is lost over the mosfet)
/Freddie |
|
|
|
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| LTspice tool for power amp power supply component evaluation | andy_c | Software Tools | 2 | 23rd August 2009 05:10 PM |
| Parallel a dual power supply or two power supplies? | Thunau | Power Supplies | 12 | 16th February 2007 04:21 AM |
| selling high current power supply for power amps. | ericpeters | Swap Meet | 0 | 14th January 2005 02:21 PM |
| heater supply (xformer specs are 6.3V 2.5A) as supply for a power LED? | jarthel | Tubes / Valves | 10 | 21st July 2003 01:30 PM |
| New To Site? | Need Help? |
