Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Pass Labs This forum is dedicated to Pass Labs discussion.

Can Bride of Son of Zen power supply be used with
Can Bride of Son of Zen power supply be used with
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 21st August 2001, 05:14 PM   #1
Tony D. is offline Tony D.
diyAudio Member
Join Date: Feb 2001
Location: Vancouver, B.C., Canada
a DACT CT-101 pre amp module? A friend has purchased the DACT and is thinking of using the power supply section of the BOSOZ.

The DACT requires a +24 0 -24 volt supply and I know that the BOSOZ PSU can be derated to lower voltages but I am unsure if it represents a + 0 - type supply.

Any info is appreciated.

Tony D.
  Reply With Quote
Old 21st August 2001, 05:23 PM   #2
Freddie is offline Freddie  Sweden
diyAudio Member
Join Date: Oct 2000
Location: Sweden
Yes it can be used, but you have to remove a couple of zener diodes. For example three 9.1V zener diodes (instead of six) in series will create 3 * 9,1V = 27,3V at the gate of the mosfet. This will create around 27,3 - 3,5 = 23,8V (The 3,5V is lost over the mosfet)

  Reply With Quote


Can Bride of Son of Zen power supply be used withHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
LTspice tool for power amp power supply component evaluation andy_c Software Tools 2 23rd August 2009 06:10 PM
Parallel a dual power supply or two power supplies? Thunau Power Supplies 12 16th February 2007 05:21 AM
selling high current power supply for power amps. ericpeters Swap Meet 0 14th January 2005 03:21 PM
heater supply (xformer specs are 6.3V 2.5A) as supply for a power LED? jarthel Tubes / Valves 10 21st July 2003 02:30 PM

New To Site? Need Help?

All times are GMT. The time now is 09:01 AM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 16.67%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Copyright ©1999-2018 diyAudio