Aleph 5 heatsinks

tonistefanovski · 25th July 2005, 11:12 AM

Dear all,
I have 2 x 8 pieces of same heatsinks with dimensions 8,5x10cm each. Can I fit them (8x) on one aluminium plate. It will have dimensions 200 x 350mm. Is this enough for one chanel of Aleph 5

Please help,
Thank's

steenoe · 25th July 2005, 09:29 PM

A picture of those sinks would make it easier to answer your question

They might do, if mounted on the aluplate with thermal paste and so on.

Steen.

BTW, just saw your other thread on this subject

Could you give a link to those Fischer heatsinks?

Eclipse911t · 25th July 2005, 11:18 PM

Copper is a much better conductor of heat if you can afford it. I would get a copper plate. Just a thought.

kilowattski · 26th July 2005, 05:08 AM

Copper is only better at spreading heat. Stick with aluminum sinks and use a copper plate for attaching them together.

tonistefanovski · 26th July 2005, 06:32 AM

Thank's to all,
I'll take a pictures of the heatsinks, and post them on the forum.
Any way it is very dificult to find spec. of this fisher heatsinks. I think that they are 1.9C/w each.

25th July 2005, 11:12 AM	#1
tonistefanovski diyAudio Member Join Date: Jun 2005 Location: Skopje,Macedonia	Aleph 5 heatsinks Dear all, I have 2 x 8 pieces of same heatsinks with dimensions 8,5x10cm each. Can I fit them (8x) on one aluminium plate. It will have dimensions 200 x 350mm. Is this enough for one chanel of Aleph 5 Please help, Thank's

25th July 2005, 11:18 PM	#3
Eclipse911t diyAudio Member Join Date: Mar 2005 Location: Fort Wayne, IN	Copper Copper is a much better conductor of heat if you can afford it. I would get a copper plate. Just a thought. __________________ "I'm against picketing but I don't know how to show it." ~Mitch Hedberg

26th July 2005, 05:08 AM	#4
kilowattski diyAudio Member Join Date: Aug 2003 Location: Long Island, New York	Copper is only better at spreading heat. Stick with aluminum sinks and use a copper plate for attaching them together. __________________ ----------------------------------------------- Kilowattski

26th July 2005, 06:32 AM	#5
tonistefanovski diyAudio Member Join Date: Jun 2005 Location: Skopje,Macedonia	Aleph 5 heatsinks Thank's to all, I'll take a pictures of the heatsinks, and post them on the forum. Any way it is very dificult to find spec. of this fisher heatsinks. I think that they are 1.9C/w each.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

25th July 2005, 09:29 PM	#2
steenoe diyAudio Member Join Date: Mar 2004	A picture of those sinks would make it easier to answer your question They might do, if mounted on the aluplate with thermal paste and so on. Steen. BTW, just saw your other thread on this subject Could you give a link to those Fischer heatsinks?

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
FS: Heatsinks for Aleph(s)..	skaara	Swap Meet	2	29th August 2006 10:36 AM
are my aleph 2 heatsinks big enough ?	dhole	Pass Labs	12	8th December 2004 09:25 PM
Heatsinks for Aleph 5	tobias_svensk	Pass Labs	2	15th February 2004 04:08 AM
Heatsinks - Aleph 5	ElectroNick	Pass Labs	7	13th December 2002 08:55 PM
Heatsinks for Aleph	skaara	Pass Labs	8	16th September 2002 07:30 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read