|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Pass Labs This forum is dedicated to Pass Labs discussion. |
  |
|
|
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
 |
|
|
Thread Tools | Search this Thread |
5th September 2002, 07:04 PM
|
#1 |
|
diyAudio Member
Join Date: Feb 2002
Location: boston
|
zen 4 power supply transformer
Any one got any advise on how to use the transformers from the original zen for the penultimate zen, I have a couple avel lindberg D4040 2x120 : 2x25v, 230VA. Should i put in an inductor and another cap to tune the ps output to 50v or should i just not worry about it and go with the 70v?
|
|
|
5th September 2002, 08:08 PM
|
#2 |
|
The one and only
Join Date: Mar 2001
|
Put an inductor in series with the transformer primary
or secondary. 70 Volts is simply too much. |
|
|
|
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| No transformer power supply | tryonziess | Solid State | 10 | 6th August 2007 03:42 PM |
| Power Supply Transformer | bal704 | Chip Amps | 12 | 8th November 2006 12:08 PM |
| 2A3 power supply transformer | tomchaoda | Tubes / Valves | 6 | 12th November 2004 01:24 PM |
| Help with this transformer/ power supply | Ionstorm | Parts | 0 | 7th January 2004 10:31 AM |
| New To Site? | Need Help? |
