New Aleph Mini Parts GB

jleaman · 21st March 2005, 07:52 AM

Part's Group Buy Guys

These component kits will include the needed components to go along with the miniALEPH pcbs from the Group Buy. There will be 2 configurations offered:

- Mini-Aleph component kit: contains all the pcb components needed for 2 channels of the miniALEPH configuration, providing 10w per channel. Included closely matched IRF9610 devices.

- Aleph-30 component kit: contains all the pcb components needed for 2 channels of the Mimi-Aleph configuration, providing 30w per channel. Included closely matched IRF9610 devices and IRFP240.

The component kits will contain the resistors, capacitors and semiconductor devices needed for populating the amplifier boards.

A parts list will be posted soon, containing the exact contents of both component kits.

http://www.diyaudio.com/wiki/index.p...Component+Kits

Mark A. Gulbrandsen · 22nd March 2005, 02:53 AM

Jason,

Regarding the pricing on your component kits.... Is this in U.S. dollars or Canadian? If U.S. this seems sort of expensive to me..... Canadian though would be a good deal...... All the passive components cost me about 7 dollars and the semi's were only another 8.82 U.S. dollars........ Thats 15.82 U.S. to populate this board.......... I'm not trying to blow this out of the water but am just wondering why so expensive?

Mark

jleaman · 22nd March 2005, 03:10 AM

I have to buy lots of parts to make this worth whyle. and the fets are 3.00 each but 100 of them about 2.50 ish.. i might change the price of the a 30 kits to be cheaper ill have to see what comes out of this.. if i get some parts cheaper i wont be charging much more for shipping. I also have to buy packaging for each kit.. and also this will be eating up about a week or so of my time. But well worth it for every one. I also have to pay Shipping to get the part's Plus brian said it would be fair traid at these prices for all the time.. On another note i have to buy 200 fets to match them for all the people.

Any comments on these Part's Kits People ?

Mark A. Gulbrandsen · 22nd March 2005, 03:17 AM

So is this in Canadian or U.S. dollars?

jleaman · 22nd March 2005, 03:18 AM

75$ Cdn ill change this right now.

Mark A. Gulbrandsen · 22nd March 2005, 03:20 AM

Yes, the Canadian figure makes it more attractive for us. Wjhere do you live in Canada? I have friends in Kinmount and Toronto!

Mark

jleaman · 22nd March 2005, 03:24 AM

I'm in Victoria B.C.

jleaman · 22nd March 2005, 03:40 AM

Id rather post better part's and what brian has sujjested. If this becomes more hassle than what it is worth ill just cancle the parts group buy..

BrianGT · 22nd March 2005, 03:45 AM

Quote:

Originally posted by jleaman
Id rather post better part's and what brian has sujjested. If this becomes more hassle than what it is worth ill just cancle the parts group buy..

I posted the parts list yesterday:
http://chipamp.com/diyaudio/miniALEPH-parts_list.xls

--
Brian

kilowattski · 22nd March 2005, 03:48 AM

Jason,

I believe Pass Labs uses Panasonic Parts in their equipment and nichicon is one of the best capacitor vendors. If you want better quality than this you need to go to exotics like Holco Resistors at $1.00 ea. and nobody will buy then.

21st March 2005, 07:52 AM	#1
jleaman Banned Join Date: Apr 2002	Part's Group Buy Guys Part's Group Buy Guys These component kits will include the needed components to go along with the miniALEPH pcbs from the Group Buy. There will be 2 configurations offered: - Mini-Aleph component kit: contains all the pcb components needed for 2 channels of the miniALEPH configuration, providing 10w per channel. Included closely matched IRF9610 devices. - Aleph-30 component kit: contains all the pcb components needed for 2 channels of the Mimi-Aleph configuration, providing 30w per channel. Included closely matched IRF9610 devices and IRFP240. The component kits will contain the resistors, capacitors and semiconductor devices needed for populating the amplifier boards. A parts list will be posted soon, containing the exact contents of both component kits. http://www.diyaudio.com/wiki/index.p...Component+Kits

22nd March 2005, 03:48 AM	#10
kilowattski diyAudio Member Join Date: Aug 2003 Location: Long Island, New York	Jason, I believe Pass Labs uses Panasonic Parts in their equipment and nichicon is one of the best capacitor vendors. If you want better quality than this you need to go to exotics like Holco Resistors at $1.00 ea. and nobody will buy then. __________________ ----------------------------------------------- Kilowattski

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Mini Aleph Board & Aleph 2 Parts List	gpsmithii	Pass Labs	3	16th January 2010 03:58 AM
WTB: Aleph Mini parts + PS Caps	Tristanc1	Swap Meet	0	28th June 2007 07:55 PM
WTB: Aleph 2 parts (Mini A Board)	chrismercurio	Swap Meet	3	9th September 2006 02:26 AM
WTB: Aleph-mini PCBs and transistor set for Aleph 30	needtubes	Swap Meet	4	6th November 2005 06:29 PM
yet another Mini-A layout... (with SMD parts)	BrianGT	Pass Labs	32	3rd March 2004 12:28 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

22nd March 2005, 02:53 AM	#2
Mark A. Gulbrandsen diyAudio Member Join Date: Sep 2001 Location: Salt Lake City	Jason, Regarding the pricing on your component kits.... Is this in U.S. dollars or Canadian? If U.S. this seems sort of expensive to me..... Canadian though would be a good deal...... All the passive components cost me about 7 dollars and the semi's were only another 8.82 U.S. dollars........ Thats 15.82 U.S. to populate this board.......... I'm not trying to blow this out of the water but am just wondering why so expensive? Mark

22nd March 2005, 03:10 AM	#3
jleaman Banned Join Date: Apr 2002	I have to buy lots of parts to make this worth whyle. and the fets are 3.00 each but 100 of them about 2.50 ish.. i might change the price of the a 30 kits to be cheaper ill have to see what comes out of this.. if i get some parts cheaper i wont be charging much more for shipping. I also have to buy packaging for each kit.. and also this will be eating up about a week or so of my time. But well worth it for every one. I also have to pay Shipping to get the part's Plus brian said it would be fair traid at these prices for all the time.. On another note i have to buy 200 fets to match them for all the people. Any comments on these Part's Kits People ?

22nd March 2005, 03:17 AM	#4
Mark A. Gulbrandsen diyAudio Member Join Date: Sep 2001 Location: Salt Lake City	So is this in Canadian or U.S. dollars?

22nd March 2005, 03:18 AM	#5
jleaman Banned Join Date: Apr 2002	75$ Cdn ill change this right now.

22nd March 2005, 03:20 AM	#6
Mark A. Gulbrandsen diyAudio Member Join Date: Sep 2001 Location: Salt Lake City	Yes, the Canadian figure makes it more attractive for us. Wjhere do you live in Canada? I have friends in Kinmount and Toronto! Mark

22nd March 2005, 03:24 AM	#7
jleaman Banned Join Date: Apr 2002	I'm in Victoria B.C.

22nd March 2005, 03:40 AM	#8
jleaman Banned Join Date: Apr 2002	Id rather post better part's and what brian has sujjested. If this becomes more hassle than what it is worth ill just cancle the parts group buy..