New Aleph Mini Parts GB

[jleaman]

Originally posted by rick57
Where is the parts list for the psu, eg does it include trannies??

Cheers

Part's List is here

http://www.chipamp.com/aleph/docs/ps-parts-list.xls

And no it does not include chassis heat sinks or trannies.

heat sinks for the diode's only.

[moving_electron]

Originally posted by pinkmouse
Jason,

Have you spoken to Apex JR to see if he has any suitable caps in at the moment? That might work out a lot cheaper. Yes, they may not be Panasonics, but I suspect for these amps quantity is more important than quality.

The "SPECIAL PURCHASE.........Snap-In caps
10,000uf 63V' on the "new" page at Apex Jr. are Nichicon. I have some of these from ApexJr.

They measure as having the same 35mm footprint as the Panasonic 10,000s in BrianGT 3886 power supply kit. The caps are snap-in that fit the hole.

The quantity one price is $1.50.

[jleaman]

Originally posted by moving_electron


The "SPECIAL PURCHASE.........Snap-In caps
10,000uf 63V' on the "new" page at Apex Jr. are Nichicon. I have some of these from ApexJr.

They measure as having the same 35mm footprint as the Panasonic 10,000s in BrianGT 3886 power supply kit. The caps are snap-in that fit the hole.

The quantity one price is $1.50.

Wonder why he didnt catch this.

[jeff mai]

Originally posted by moving_electron
These are actually a smaller (narrower footprint) but taller. Not particularly tall but taller than the 10000uF 63V

Personally, I'd prefer shorter caps that fit the PCB footprint if it only means a couple of extra bucks. Even a few mm can mean a big difference in price when you put stuff in a chassis.

[jleaman]

Originally posted by jeff mai


Personally, I'd prefer shorter caps that fit the PCB footprint if it only means a couple of extra bucks. Even a few mm can mean a big difference in price when you put stuff in a chassis.

yup i agree id rather buy what brian has used for the layout and tested. If we order 200 caps and they dont fit we dont get a refund : O ) and it is all wasted time.

I say we stick with the quote i gave for people and go from there.

Im trying to get it to 20 kit's 1 kit = 1 package to fill the psu board.

Jason

[BrianDonegan]

Jason, you have mail

[Apex Jr]

Since this site has been very good to me I'm willing
to give a DIY Forum price breaks on prices listed on the
website on The Snap In caps and the 3 toroids used in
the gainclones, say for the :
10, 000 Uf 63 V at $1.20 ea
12, 000 Uf 50 V at $1.00 ea
12,000 Uf 63 V at $1.50 ea
12,000 Uf 35 V at 3/ $1.00

TOROIDS
2 X 25V 50 Vct 100 VA. $15.00ea
2 X 28.4v 56.8Vct 160Va $19.95ea
2 X 21V 42Vct 80Va $10.00ea

TO 220 Heat sinks listed on new arival page
thermalloy 6079 .10ea
thermalloy 7022 .15ea

anything else needed just ask,
TO GET THESE PRICES YOU MUST MENTION THIS FORUM BY NAME.

STEVE @ Apex Jr.
www.apexjr.com

[Apex Jr]

Rather than putting questions and making this thread
longer you can email me direct with any questions
or price quotes at:

steve.apexjr@prodigy.net

[steenoe]

10, 000 Uf 63 V at $1.20 ea

Those caps and the others as well, are quite a "giveaway" I am tempted
Nice offer, Steve

Steen.

[jleaman]

For people that want there kits Money should be in my hands soon so i can order all the goodies and get these going.

Little nuge to people to get on this. : O )


Jason