Aleph3 PSU - diyAudio
Go Back   Home > Forums > Amplifiers > Pass Labs

Pass Labs This forum is dedicated to Pass Labs discussion.

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 9th August 2001, 01:51 PM   #1
diyAudio Member
 
Join Date: Jul 2001
I'm thinking,to improve my Aleph3 psu rejection with a simple emitter follower circuit after the big (30.000uf) caps!
What is your opinion? Will improve the amps performance?
  Reply With Quote
Old 9th August 2001, 02:44 PM   #2
Koy is offline Koy  Czech Republic
diyAudio Member
 
Join Date: Jan 2001
Location: Zlin
No, it does not. I tried cap multiplier ( 10G and BDX33/34 darlingtons). The hum is not discernable. The sound seems to be a little slim, low frequencies a little suppressed. And after all, you need heatsink for about 10W per channel. I cut the multiplier off. I run Aleph only with caps ( 20G is sufficient).
  Reply With Quote
Old 12th August 2001, 09:45 AM   #3
diyAudio Member
 
promitheus's Avatar
 
Join Date: Jan 2001
Location: Germany
Donīt use that it will supress the sound. If you want to you will have to use multiple transistors to do the job rated a lot higher then the circuit. Usually regulated power supplies suffer from a lot of problems and the sound is mostly worst after.
  Reply With Quote
Old 20th August 2001, 11:42 AM   #4
diyAudio Member
 
Join Date: Aug 2001
Location: Malaysia
Why when we have a regulated PSU, the quality of the signal or sound will become bad?

Beside this, what are the pro and con of using a regulated PSU in Aleph series?

  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
aleph3, 30 and 5 kslim Pass Labs 1 9th September 2004 01:58 AM
my little Aleph3 moamps Pass Labs 16 27th August 2003 09:48 PM
Help: Aleph3 PS Upgrade To 50V Jay Pass Labs 2 25th August 2003 04:08 PM
Aleph3 to cold? Kermit Pass Labs 11 3rd May 2003 11:41 PM
Aleph3 HarryHaller Pass Labs 13 7th February 2002 02:46 AM


New To Site? Need Help?

All times are GMT. The time now is 02:31 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright ©1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2