TO3P Sockets

vinay · 6th April 2005, 08:13 PM

Does anyone know if there are (and where I can get them) sockets for TO3P and TO-220 packages?

If someone has them and is willing to send me couple of each (I will pay for them) I would greatly appreciate it.

Vinay

Netlist · 6th April 2005, 08:38 PM

Assuming its for temporary use or test purposes I use something like this

/Hugo

vinay · 6th April 2005, 11:09 PM

yes it is for test purpose, I wanted something that you could swap out the devices quickly, without having to labor with tightening the screws and so on.

Kermit · 7th April 2005, 05:24 PM

I use ic sockets for testing. TO220 fits in pin 1,2 and 3 and to3p fits in pin 1,3 and 5

vinay · 7th April 2005, 06:23 PM

Kermit,

thanks, that seems like the most efficient solution.

vinay

aht · 8th April 2005, 03:46 AM

I modified from switching connector

6th April 2005, 08:13 PM	#1
vinay diyAudio Member Join Date: Mar 2001 Location: Seattle	TO3P Sockets Does anyone know if there are (and where I can get them) sockets for TO3P and TO-220 packages? If someone has them and is willing to send me couple of each (I will pay for them) I would greatly appreciate it. Vinay

7th April 2005, 05:24 PM	#4
Kermit diyAudio Member Join Date: Jun 2002 Location: Oslo - Norway	I use ic sockets for testing. TO220 fits in pin 1,2 and 3 and to3p fits in pin 1,3 and 5 __________________ Sven Sødem

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
tube sockets	bigpanda	Tubes / Valves	1	15th June 2006 10:34 PM
WTB: 6x Silpad 2000 TO3P	kasra	Swap Meet	1	3rd February 2006 08:33 PM
DAC on 16 pin DIP sockets	dip16dac	Digital Source	1	19th May 2004 02:10 AM
WTB UX5 sockets	bcherry	Swap Meet	0	1st March 2003 03:24 PM
RCA sockets	carlmart	Parts	8	31st January 2003 11:21 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

6th April 2005, 08:38 PM	#2
Netlist diyAudio Moderator Join Date: Jan 2003	Assuming its for temporary use or test purposes I use something like this /Hugo

6th April 2005, 11:09 PM	#3
vinay diyAudio Member Join Date: Mar 2001 Location: Seattle	yes it is for test purpose, I wanted something that you could swap out the devices quickly, without having to labor with tightening the screws and so on.

7th April 2005, 06:23 PM	#5
vinay diyAudio Member Join Date: Mar 2001 Location: Seattle	Kermit, thanks, that seems like the most efficient solution. vinay

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)