diyAudio (
-   Pass Labs (
-   -   PCB-for AlephP preamplifier? (

victor 1st August 2001 10:58 PM

I need a PCB schematic for AlephP preamplifier,if have someone or know, where can i found please e-mail me.
Thanks for the help.
Regards Victor.

hifi 2nd August 2001 07:37 PM

i would like to have a schematic for the P1.0 volyme controll otherwise i will havto draw it myself....=((

Miles Teg 3rd August 2001 05:34 PM


Give me the compos reference of your Aleph (the most precise you can have)

Give me your demension, your philosophy (1, 2 boards) with power separate or not


I made it.

Come on... I have lot of time. And the formation...

Miles Teg 3rd August 2001 05:38 PM

Sorry I would say that I make the PCB on what scheme you want.

I want to participe at the effort of the community.

I'm so impetuous...

hifi 3rd August 2001 06:30 PM under download...make an layout for the relay control circuit for the P10 ........

it would probobly be a waste of time to make one for the relays since alomst everybody will use different kinds..... good are u drawing layouts? ...


victor 3rd August 2001 08:42 PM

Miles Teg!

Thank's for your effort to help me and others!
I need the PCB only for the (alephP 1.7) preamplifier part.
The dimension not so important,if you can, do short as posibile the circuits.
Oh i forget it, the output caps i would to use are 27mm long
and 19 wide.I will use 2 for output (paralell) and 1 for input.Another components is as usual 1/4w resistors i use.
Thanks again your help and waiting...

Miles Teg 4th August 2001 09:49 AM

I know this idea will have succes.

But please, be more precise.

If you want to me make a PCB, send me a mail with attached the schematic and the max precise will you want. (size and referenc of your parts, the general placement of your modifiable comps...)

How good I raw layouts? I'm a newbie (19 years) but a professional. I make PCB long the years in school.

The most difficult thing is to get libraries for the components or to make it, so I need to see the composants send me the max info you can.

I think the big wokrs begin now for me (Sigh!!).

Victor - I'm just downloading Aleph 1.7, I study it and I make a first try. But continue to send me more precise infos.

uuuhhhh for your mods send me a draw, this more efficient than a long discuss. (You say to me input and output) and I don't know that we are the same conception of electronic, I'm a professional that don't have the habit of audiophile.

Hifi - Send me a mail, I don't know the P10 so when you talking to me about relays ??? I must to see the schem before. Promise I will get him. For the moment I'm concentrate for Aleph Preamp (for victor) one thing by one thing.

Be patient everybody.

hifi 4th August 2001 04:29 PM

the p1.0 the predecessor to p1.7...but nevermind im drawing my own layout...i couldnt wait =)) thanks anyway...

btw witch program do u use?


Miles Teg 5th August 2001 07:34 AM

Alpeh P 1.7 PCB drawing
Well, well.
Big schematics isn’t it? (Aleph P 1.7)
The difficulties is to bind the different ***** and to construct form the existent implantation the left side of phonic part.

So it will be take me more time than expect but I think that it is makeable.
But when you say "the caps on the output", the output of what ? ?
I'm use for technical electronic it's an engineering works but the audiophile DIY seem like... cooking. I will learn a lot here.

- Victor for Aleph P 1.7 PCB draw

* One question: on Aleph P Motherboard I think that +REGULATED is bind with +50V of the power supply, do you think so ? (It’s Right?)
* The caps who you give me the dimension are the Q27<->Q30 ? Yours have the same dimensions of the past implantation (in diameter)?
* I prefer vertical position for the transistor (like Q23 Q24 Q22…), that made more dissipate, your advise?
* Do you wish to put some little caps in parallel of diodes bridge?
* What’s the style of switches (SW1)?
* What’s the exact reference of Thermistor TH1?
* CHA(-IN,+in)CHB(+in,-in) can be bind with +output –output +input –input, it’s right?
* What sort of relay was used for Relay1-8A and for RLY1-16? I think they must be the most quite as possible (you too I’m sure…).

Holly **** they are two side! For the motherboard only one side was shown.
Wow ! ! The Pass parts placing is good looking. Sure I will copy it (Do you forgive me ? But it’s really good) Ouch ! ! With this schema my Iiyama 17’’ seems to little. I forgot a side ! ! What a sugar I make J

*For the two side of the motherboard I think that de R73 spray the +50V to the two side, and that one of the C25 or C26 goes to the left side.
* The switch for gain choice. Do you need it? How do you want the switches or switch? (SW1)
* The optical interrupts, nobody have more precise?

Hifi – I use P-cad, with this I must write the schematic, it make a net list which place component on the Pcad PCB, and finish my work.

All times are GMT. The time now is 02:32 AM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 18.75%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Copyright ©1999-2018 diyAudio