http://www.partstore.com/PartNumberSearchResults.aspx?PartNumber= 2SK389
Which one is the right part?! They have a bunch listed.
Thanks,
Matt
Which one is the right part?! They have a bunch listed.
Thanks,
Matt
JFET parameters have a very wide variation. Hand matching JFETs is very time consuming and expensive. If you know the approximate bias current in the circuit you can try to purchase binned parts. I typically bias my JFET diff amp stages to 4 ma per transistor and purchase the BL graded parts. A phono input stage that works on very low currents would likely use GL grade parts.
To my knowledge, these dual JFETs are now discontinued and there are mainly Toshiba old stock in the market.
2SK389, 2SJ109 Idss BINNING:
GL: 2.6-6.5ma
BL: 6-12ma
V: 10-20ma
You can also check component suppliers like MCM, Digikey, etc...to purchase these transistors. You might find better prices, but a higher minmum order requirement.
To my knowledge, these dual JFETs are now discontinued and there are mainly Toshiba old stock in the market.
2SK389, 2SJ109 Idss BINNING:
GL: 2.6-6.5ma
BL: 6-12ma
V: 10-20ma
You can also check component suppliers like MCM, Digikey, etc...to purchase these transistors. You might find better prices, but a higher minmum order requirement.
I bought the 2SK389 from:www.ceitron.com,for my Pearl.
The price is:$2.25/each-buy 1-9 pieces
$1.75/each-buy 10 and up
The price is:$2.25/each-buy 1-9 pieces
$1.75/each-buy 10 and up
LineSource said:
To my knowledge, these dual JFETs are now discontinued and there are mainly Toshiba old stock in the market.
Toshiba continues production but just on special order (huge quantities)
Uli
dzkh63 said:I bought the 2SK389 from:www.ceitron.com for my Pearl.
The price is:$2.25/each-buy 1-9 pieces
$1.75/each-buy 10 and up
Thank you!
I ordered 10 - 2SK389's and 16 - 2SK170BL's
Matt
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.