Bride of zen PCB

maartentje · 12th February 2005, 06:21 PM

Hai there,

Doe somebody know where i could buy a bride of zen pcb board?

Greetz maarten

vdi_nenna · 12th February 2005, 06:35 PM

maartentje · 13th February 2005, 03:48 PM

hai there,

yes but i dont have a mastercard to pay with iam searching for something where i can pay with a bank transaction.

Greetz maarten

eLarson · 13th February 2005, 06:47 PM

Why not wire it up point to point? It is about as simple a circuit as you're going to find.

Erik

arold19 · 13th February 2005, 10:34 PM

Yeah, wire it point to point. I did 2 BOZ this way, the circuit is so simple.
I maded one for the power supply and one for the amplifier....
Buy more TIP29 than you need, because I've got some problem at the beginning

vdi_nenna · 13th February 2005, 10:41 PM

If you are a beginner, point to point is harder to troubleshoot. (I know.)

I'm sure AudioXpress deals with international sales and have other methods of payment. Check the site, if you haven't.

Also, on www.passdiy.com, you can find the artical with the board. You could have it made up by a professional circuit maker in your area?

Vince

maartentje · 13th February 2005, 10:48 PM

Hai there,

thanks all
i am no beginner but my expirments are that a pcb board sounds in the most time's beter than point to point exept tube preamplifier its al about earthing.

greetz maarten

vdi_nenna · 13th February 2005, 10:48 PM

I forgot about Krisjian. He's in Europe, he could put a board together.

http://web.vip.hr/pcb-design.vip/

arold19 · 14th February 2005, 01:26 AM

I never hear about the difference between a PCB an a point to point amplifier...
Can anybody talk about this ?
I alway think that point ot point, if is well done, make very good result because each device is solder dirrectrly to the others...

And why it is good for the tube and not for the transistor ?

12th February 2005, 06:21 PM	#1
maartentje diyAudio Member Join Date: Jun 2002 Location: USA, FL	Bride of zen PCB Hai there, Doe somebody know where i could buy a bride of zen pcb board? Greetz maarten

12th February 2005, 06:35 PM	#2
vdi_nenna diyAudio Member Join Date: Oct 2000 Location: PA, USA	Try: http://www.audioxpress.com/

13th February 2005, 06:47 PM	#4
eLarson diyAudio Member Join Date: Aug 2002 Location: Gaithersburg, MD	Why not wire it up point to point? It is about as simple a circuit as you're going to find. Erik __________________ Would a woodchuck bother to chuck MDF?

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
New PCB for bride of zen	maartentje	Pass Labs	6	28th February 2005 07:19 AM
bjt bride of zen	renjiish	Pass Labs	1	24th September 2004 03:54 PM
Bride of son of zen -----> WHERE?	m60gpmg	Pass Labs	6	23rd September 2002 09:08 PM
Bride of Zen, Bride of Son of Zen	2Bak	Pass Labs	4	12th May 2002 04:51 PM
Bride of Son of Zen vs. A;eph P	Peter Daniel	Pass Labs	0	25th January 2002 07:45 PM


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

13th February 2005, 03:48 PM	#3
maartentje diyAudio Member Join Date: Jun 2002 Location: USA, FL	hai there, yes but i dont have a mastercard to pay with iam searching for something where i can pay with a bank transaction. Greetz maarten

13th February 2005, 10:34 PM	#5
arold19 diyAudio Member Join Date: Nov 2002 Location: montreal	Yeah, wire it point to point. I did 2 BOZ this way, the circuit is so simple. I maded one for the power supply and one for the amplifier.... Buy more TIP29 than you need, because I've got some problem at the beginning

13th February 2005, 10:41 PM	#6
vdi_nenna diyAudio Member Join Date: Oct 2000 Location: PA, USA	If you are a beginner, point to point is harder to troubleshoot. (I know.) I'm sure AudioXpress deals with international sales and have other methods of payment. Check the site, if you haven't. Also, on www.passdiy.com, you can find the artical with the board. You could have it made up by a professional circuit maker in your area? Vince

13th February 2005, 10:48 PM	#7
maartentje diyAudio Member Join Date: Jun 2002 Location: USA, FL	Hai there, thanks all i am no beginner but my expirments are that a pcb board sounds in the most time's beter than point to point exept tube preamplifier its al about earthing. greetz maarten

14th February 2005, 01:26 AM	#9
arold19 diyAudio Member Join Date: Nov 2002 Location: montreal	I never hear about the difference between a PCB an a point to point amplifier... Can anybody talk about this ? I alway think that point ot point, if is well done, make very good result because each device is solder dirrectrly to the others... And why it is good for the tube and not for the transistor ?

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read