diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Pass Labs (http://www.diyaudio.com/forums/pass-labs/)
-   -   Bride of zen PCB (http://www.diyaudio.com/forums/pass-labs/51459-bride-zen-pcb.html)

maartentje 12th February 2005 06:21 PM

Bride of zen PCB
 
Hai there,

Doe somebody know where i could buy a bride of zen pcb board?

Greetz maarten

vdi_nenna 12th February 2005 06:35 PM

Try: http://www.audioxpress.com/

maartentje 13th February 2005 03:48 PM

hai there,

yes but i dont have a mastercard to pay with iam searching for something where i can pay with a bank transaction.

Greetz maarten

eLarson 13th February 2005 06:47 PM

Why not wire it up point to point? It is about as simple a circuit as you're going to find.

Erik

arold19 13th February 2005 10:34 PM

Yeah, wire it point to point. I did 2 BOZ this way, the circuit is so simple.
I maded one for the power supply and one for the amplifier....
Buy more TIP29 than you need, because I've got some problem at the beginning

vdi_nenna 13th February 2005 10:41 PM

If you are a beginner, point to point is harder to troubleshoot. (I know.)

I'm sure AudioXpress deals with international sales and have other methods of payment. Check the site, if you haven't.

Also, on www.passdiy.com, you can find the artical with the board. You could have it made up by a professional circuit maker in your area?

Vince

maartentje 13th February 2005 10:48 PM

Hai there,

thanks all
i am no beginner but my expirments are that a pcb board sounds in the most time's beter than point to point exept tube preamplifier its al about earthing.

greetz maarten

vdi_nenna 13th February 2005 10:48 PM

I forgot about Krisjian. He's in Europe, he could put a board together.

http://web.vip.hr/pcb-design.vip/

arold19 14th February 2005 01:26 AM

I never hear about the difference between a PCB an a point to point amplifier...
Can anybody talk about this ?
I alway think that point ot point, if is well done, make very good result because each device is solder dirrectrly to the others...

And why it is good for the tube and not for the transistor ?


All times are GMT. The time now is 02:12 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2